Slotting & Side Hole Machining on LNC MW5800A: Step-by-Step Guide

Sinumerik POCKET2 Circular pocket millingWith Sinumerik POCKET2 cycle, circular pockets can be produced.Sinumerik POCKET2 cycle is a combined roughing/finishing cycle.ProgrammingPOCKET2 (RTP, RFP, SDIS, DP, DPR, PRAD, CPA, CPO, FFD, FFP1, MID, CDIR, FAL, VARI, MIDF, FFP2, SSF)ParametersParam

Laser nozzle: The nozzle can assist the gas to be ejected quickly, which can effectively prevent the debris from bucking up and rebound, thus protecting the focusing mirror. At the same time, it can control the gas diffusion area and size, which will affect the cutting quality of fiber laser cut

The Impact of Residual Stress in CNC MillingAluminium alloys offer excellent ductility and thermal conductivity, which makes them ideal for high-speed machining. However, their crystalline structure is prone to work hardening and thermal deformation.During machining, the removal of material can caus

“If it works, don’t touch it!” Manufacturers lived by this rule in the early days of CNC machining. In fact, CNC machine maintenance was purely reactive, and manufacturers were fine with using their machines till they broke down. However, everything changed after downtimes s