Changing Tools in the Syntec 6MB Control System: Automatic and Manual Methods

There are two ways to change tool. One is change tool automatically,the other is manually.

Firstly,we will show you how to change tool automatically.

The steps are as follows.

we will change tool from T1 to T2

Press “MON” and “MDI”buttons in control panel.

Select “MDI Input”,input “T2”

Press “MPG SIM” while open “AUTO”mode

By Rotating the MPG(handle) to control the speed of moving

The video is as follow.

Then we will show you how to change tool manually.

The steps are as follows.

we will change tool from T1 to T2

Press green button on spindle,the tool will loose from spindle.
ATTENTION:PLEASE MAKE SURE THE TOOL WAS HELD WHEN YOU PRESS THE GREEN BUTTON. IF NOT,THERE WILL BE A RISK OF DAMAGE TO THE TOOL.

The video is as follow.

How to Upload a File to the DSP B18 Handle Control System Step-by-Step Guide: Importing Files into the DSP A11 Control System

CNC Machine

Industrial robot

Industrial equipment