Industrial manufacturing
Industrial Internet of Things | Industrial materials | Equipment Maintenance and Repair | Industrial programming |
home  MfgRobots >> Industrial manufacturing >  >> Manufacturing Equipment >> Industrial equipment

Effective Cleaning & Disinfection Tips for Construction Equipment Cabs

Enclosed spaces like cabs can harbor germs and viruses like the coronavirus — during times like this, cleanliness is incredibly important. Keeping surfaces disinfected is a responsibility for everyone to help keep each other protected.

At Volvo we are doing our part to help keep customers safe, and that now includes contactless sanitizing of cabs and touchpoints on all Volvo Certified Used and Volvo Inspected machines. It’s another level of assurance you receive when buying Volvo used equipment.

Below, I’ve explained the steps we take to sanitize every Volvo Certified Used or Volvo Inspected machine. These tips may be useful for your machines well — not just now, but any time.

  1. We use an EPA-approved disinfectant which is effective at deactivating the novel coronavirus and is safe for interiors. It won’t damage components in the interior of the cab like touch screens, switches and upholstery. Our VCU sanitizer is contactless, so no need to wipe after applying. There are many different types of products that can be used for your own equipment. Refer to the links below for a list of EPA-approved sanitizers.
  2. Effective Cleaning & Disinfection Tips for Construction Equipment Cabs

    When cleaning, be sure to use latex or synthetic rubber gloves and a mask or face covering. Typically, this step might get overlooked, but with a virus that can spread asymptomatically, this is the best way to ensure you’re not inadvertently re-infecting the surfaces while you’re cleaning them.

  3. Spray all exterior and interior handles and compartments. This includes floor mats, windows and hard surfaces as well as joysticks, steering wheel, knobs and any other touchpoints inside of the cab. Clean with detergent or soap and water if the surfaces are visibly dirty prior to disinfectant application.
  4. Effective Cleaning & Disinfection Tips for Construction Equipment Cabs

    Be mindful when cleaning electronic consoles and display interfaces. An EPA-approved, contactless product may leave a film when it dries, but it’s not necessary to wipe it off once you achieve full coverage. You can also spray disinfectant on a microfiber cloth and wipe the displays and keypads.

  5. When addressing the upholstery, avoid using any products that contain bleach to prevent damage, and remember to wipe down the seat belts including the buckles.
  6. Spray all machine touchpoints including the dipstick, gas cap, engine access points, handles, latches, etc.
  7. Effective Cleaning & Disinfection Tips for Construction Equipment Cabs

    If accessing the machine from the ground, be sure to spray all door handles and grab bars at the end of your cleaning.

The CDC has provided additional information on cleaning and disinfecting non-emergency transport vehicles that you may find beneficial as well. According to the CDC, for disinfection of hard, non-porous surfaces, appropriate disinfectants include:

Effective Cleaning & Disinfection Tips for Construction Equipment Cabs

Finally, we’re sending out a spray bottle of EPA-approved disinfectant with our Volvo Certified and Volvo Inspected used machines for use upon delivery. We take doing our part to help keep everyone healthy very seriously — and we hope you will, too. And remember, although we’ve taken these precautions to protect you against COVID-19, reinfection could take place at any time. Please take appropriate precautions every time you contact any surfaces or environment, and consult your operator’s manual for full details on general cab cleaning procedures and maintenance.

At Volvo we are doing our part to help keep customers safe, and that now includes contactless sanitizing of cabs and touchpoints on all Volvo Certified Used and Volvo Inspected machines. It’s another level of assurance you receive when buying Volvo used equipment.

Below, I’ve explained the steps we take to sanitize every Volvo Certified Used and Volvo Inspected machine. These tips may be useful for your machines as well — not just now, but any time.

Cab Sanitizing for Volvo Certified Used and Inspected Equipment

7 Steps to Sanitize Your Equipment Cab


Industrial equipment

  1. 6 Proven Strategies for Buying Used Construction Equipment
  2. Comprehensive 5-Step Diagnostic Process for Construction Equipment Mechanics
  3. 3 Proven Tips for Securing Quality Construction Equipment at Auction
  4. Proven Excavator Operator Strategies for Efficient Trenching & Loading
  5. Essential Safety Tips for Moving Heavy Machinery
  6. Expert Guide to Sanitizing Forklifts and Tractor Cabs
  7. 5 Essential Safety Tips for Transporting Heavy Equipment
  8. Top 3 Essential Tips for Industrial Equipment Maintenance & Safety
  9. Enhancing Maintenance Programs: Proven Strategies for Optimal Asset Performance
  10. Proven Strategies for Maintaining Used Construction Equipment