October 2018: Top 5 Trusted Used Sheet Metal Machines

Still looking for a used sheet metal machine? October is over but our usual “Top 5 used machines” continues. Today we’re going to talk about this category that always attracts a lot of visitors on Exapro.com.

October has been a very interesting month, especially because of the fact we’re having 3 laser cutting machines from the well-known German manufacturer: Trumpf.

Let’s start.

Trumpf Trulaser 2030 Laser Cutting Machine

As you might have noticed on the product page, 225 buyers were interested in this Trulaser 2030 model from 2007. Available in Turkey, the machine comes with a Siemens SINUMERIK 840D control unit, a max load of 350kg, and a high pressure cutting HI-LAS.

Trumpf Trulaser 2030 Laser Cutting Machine – available now on Exapro.com

Some specifications:

• Head with lenses 7,5″
• Positioning laser diode
• Auto-detection of the sheet edge
• Programmable gas cutting pressure
• Length x width x height: 13400.0 mm × 7250.0 mm × 2750.0 mm

If you’re interested in it, contact right now the seller through the product page.

Trumpf TCL 3050 Laser Cutting Machine

In the second position here comes another Trumpf machine with a Siemens SINUMERIK 840D CNC type. A bit more than 200 buyers were also interested in this machine ready to be picked up in Italy.

Trumpf TCL 3050 Laser Cutting Machine – available now on Exapro.com

Some specifications:

• Hard disk memory: 500 MB
• Cutting capacity on construction steel 25 mm, alloy steel 20 mm, aluminum 12 mm
• Metal length: 1500.0 mm
• Color monitor: 12 “TFT display

Visit the product page for more information and feel free to contact the seller.

BLM 120 Tube Bending Machine

Have you checked this BLM machine out? Available as well in Italy, this BLM 120 pipe blender could be the one you need. Don’t miss any opportunity.

BLM 120 Tube bending machine – available now on Exapro.com

Some specifications:

• Bending angle: 185°
• Maximum bending speed gr. / sec. 17.5 °
• Max. radius of curvature on the centerline of the tube: 500 mm

Check out the product page for more information and be in touch with the seller right now.

Goiti Danobat PGA1 CNC Punching Machine

Let’s travel to Spain now with this 2001 PGA1 model available for 34,500€. The seller affirms there is also the possibility of selling parts of another PGA1. The machine is definitely worth it to have a look at.

Goiti Danobat PGA1 CNC Punching Machine – available now on Exapro.com

Some specifications:

• Maximum number of strokes: 600 strokes/min
• Carriage speed: 80 m/min
• Power: 30 T
• Hours under power: 51 000 hours

Feel free to have a look on the product page to get the full description and to contact the seller for more information.

Trumpf TCL 4030 – 3000W Laser Cutting Machine

To finish this top 5, we have this laser cutting machine built in 1997 for which the seller provides a lot of information. A German product situated in Germany. This is really convenient for a visit/inspection.

Trumpf TCL 4030 – 3000W Laser Cutting Machine – available now on Exapro.com

Some specifications:

• Laser-Type: CO2 TCL 3000 turbo Overtaken in 2016
• Automatic shut-down device
• The FocusLine control mechanism automatically adapts the position of the laser focus on the type and thickness of the material.
• PlasmaLine monitors process safety when cutting thick stainless steel

Once again, the seller provides a complete description, so feel free to have a look on the product page.

Thank you for reading our articles, stay informed about the industrial world and Exapro by following us on Exapro Hub, Facebook, Twitter, and LinkedIn.