Rexroth A8VO Hydraulic Pump: High-Pressure Performance for Industrial Applications

The Rexroth A8VO hydraulic pump is designed to handle the high pressure and flow of industrial applications. The A8VO pump features a high-pressure ratio and low-loss design. It also has a compact design that allows it to operate in confined spaces with minimal shaft length.

The Rexroth A8VO hydraulic pump features a pressure range of 20 to 1,000 bar (3,300 psi), providing up to 10 times higher pressure than standard pumps. This allows you to use less energy while maintaining performance standards.

The A8VO series pump is a mechanical piston type of pump that uses an eccentric rod for its operation. This type of pump is ideal for applications where efficiency and reliability are key factors in selecting the right product for your needs.

Rexorth A8VO Hydraulic Pump is high pressure swashplate axial piston pumps. These are available with various controls and can be used in open and closed circuits.

The pump body is made of cast iron with a steel housing. The pistons are made of aluminum alloy and are bonded to the shaft by brazing. The cylinder liner is made of steel billet, hardened to HRC 58-60 and ground to a tolerance of +/- 0.005mm. The seals are made of EPDM rubber which is self-lubricating and has good resistance to mineral oils, synthetic oils, petrols and fuels at normal operating temperatures up to 200°C without any loss of performance due to aging or wear over time.

The hydraulic motors used for this series have a full complement of auxiliary devices fitted as standard equipment such as: oil cooler, lubrication pump, thermal protection device (thermostat), pressure relief valve (snubber), integrated suction filter (wet type), suction filter bracket

Rexorth A8VO Hydraulic Pump Overview

High performance, compact dimensions and low weight make it an ideal choice for a variety of applications.

The Rexroth A8VO is a high-performance, compact hydraulic pump with a volumetric efficiency ratio of up to 98 percent. It is available in two different versions: The A8VO-1 has a displacement of 0.5 liters/rev (0.5 cc) as standard; the A8VO-2 has a displacement of 1 liter/rev (1 cc). The A8VO series is available in four different pressure classes: PN 6, 10, 16 and 25 bar (80, 150, 250 and 400 psi).

The oil pump is mounted on top of the housing to ensure good accessibility for maintenance work such as changing seals or replacing bearings. Its lightweight design makes it suitable for mobile machines with limited mounting space or where low weight must be achieved such as construction equipment.

The pumps are compact and can be used in extremely harsh environments. The noise emission level is very low, making it suitable for mobile applications as well.

The Rexorth A8VO series of hydraulic pumps are direct acting, rotary vane pumps with a single stage and one suction port. These pumps are ideal for industrial applications that require high pressure at medium flow rates or low pressure at high flow rates. They are available in three different shaft options: Bronze bushings, steel bushings or stainless steel shafts.

A typical application for this pump would be to provide power to a linear actuator or other device that requires high pressure at medium flow rates or low pressure at high flow rates. It can also be used as a source of hydraulic fluid for multiple applications within an industrial facility.

The universal controller makes it possible to use the pump with different control modes.

The Rexroth A8VO hydraulic pump series are high performance double-acting hydraulic cylinders that can be used in a wide range of applications. The Rexroth A8VO is available in both single and double acting versions, with stroke lengths from 80mm to 700mm. All models can be combined with an optional electric control unit, which offers maximum flexibility and ease of operation.

The Rexroth A8VO has been designed for use in demanding applications such as textile machines, car washes and assembly lines where space is at a premium.

Individual adjustment of flow and pressure rate is possible by using the control ring on the pump.

Rexorth A8VO Hydraulic Pump is a variable-output hydraulic pump, it can be adjusted from 0 to 8 bar. It has a maximum flow rate of 10 l/min, and a maximum pressure of 6 bar. This means that you can use this pump for many different tasks. If you need to control the speed of your machine, then you can use this Rexorth A8VO Hydraulic Pump because it is easy to operate with only one hand! You can easily adjust the pressure and flow rate with your thumb, which makes this Rexorth A8VO Hydraulic Pump very useful in many situations.

This Rexroth A8VO Hydraulic Pump has a compact design so it will fit into any space available on your machine or machine tool! It comes with an integrated hydraulic filter which allows for long-term operation without maintenance! This Rexroth A8VO Hydraulic Pump is also built with high quality materials so it will last for years without any problems!

An optional mounting flange is available for easy installation of the Rexroth A8VO pump.

The Rexroth A8VO hydraulic pump is a compact, high-pressure unit that delivers up to 400 bar (5,800 psi) of pressure. This piston-type pump features an oil-cooled motor and a mechanical seal.

The Rexroth A8VO hydraulic pump is designed for high-pressure applications requiring large displacements. An optional mounting flange is available for easy installation of the Rexroth A8VO hydraulic pump.

Rexroth offers a complete line of high-pressure single-stage piston pumps for use in mobile and industrial equipment, as well as agriculture and construction machinery. The full portfolio includes pumps with capacities ranging from 0.1 kW to 1 MW at pressures up to 5,800 psi (40 MPa).

Rexorth A8VO Hydraulic Pump Overview

These are powerful, versatile pumps that are suitable for a wide range of industrial applications.

Rexroth’s A8VO series is designed for use with linear motors in applications such as conveyor belts, machine tools and robots. The pumps feature a compact design, high power density and low weight, making them ideal for use in compact spaces or where space is limited.

The A8VO hydraulic pump is available with either an oil-free piston or an oil-lubricated piston, each of which has a flow rate up to 9.5m³/h. The oil-free piston version has zero lubrication requirements and can be used at temperatures from -40°C to +100°C without requiring any special lubrication systems or modifications to the pump body.

Overall, Rexorth A8VO Hydraulic Pump is a leading brand of product in the marketplace. It has a lot of high quality features and capabilities which everyone needs from Rexorth A8VO Hydraulic Pump. The Rexorth A8VO Hydraulic Pump received 4 stars because it’s a premium product but it’s not too expensive for the average person.