Complete Bosch CC 100 M G‑Codes & M‑Codes Guide for CNC Mill Operators

Bosch CC 100 M CNC control G code and M Code complete list for cnc machinists who work on CNC Mill with BOSCH CC 100 CNC control.

G-Codes Bosch CC 100 M

G-Code	Description
G0	Positioning in rapid
G1	Linear interpolation at programmed feedrate
G3	Circular interpolation, clockwise
G3	Circular interpolation, counter-clockwise
G4	Dwell in seconds
G5	Circular interpolation with tangential entry
G6	Linear interpolation in rapid with extended IN POS range
G17	Plane selection X/Y
G18	Plane selection Z/X
G19	Plane selection Y/Z
G20	Setting pole for polar coordinates
G21	Subprogram call-up depending on I/F signal
G22	Subprogram call-up, unconditional
G23	Jump to program label depending on I/F signal
G24	Jump to program label, unconditional
G25	Field limitation, setting minimum values
G26	Field limitation, setting maximum values
G27	Cancelling field limitation
G36	Scale factor switching
G38	Switch on programmable mirroring
G39	Switch off programmable mirroring
G40	Cancelling tool radius compensation
G41	Tool radius compensation to the left of the path
G42	Tool radius compensation to the right of the path
G53	Cancel zero shift
G54 to G59	Switch on zero shift
G61	‘In Position’ function on
G62	‘In Position’ function off
G63	Feedrate and spindle speed set to 100%
G64	Feedrate applies to contour on circular contours
G65	Feedrate applies for tool centre path
G66	Feedrate/spindle speed can be modified via pot.
G68	Auxiliary arc on outside corners
G69	Intersection on outside corners
G74	Referencing
G75	Measuring probe
G80	Cancel fixed cycles G81 to G89
G81	Drilling, centering
G82	Boring with dwell
G83	Deep hole drilling with positioning movements in rapid
G84	Tapping with dwell
G85	Boring with dwell/oriented spindle stop
G86	Reaming
G87	Thread milling
G90	Input in absolute dimensions
G91	Input in incremental dimensions
G92	Setting position stores / Setting top limit for spindle speed
G93	Time programming
G94	Feedrate direct in mm/min
G95	Feedrate in mm/rev
G96	Automatic calculation of cutting speed
G97	Direct spindle speed programming
G99	Subprogram end
G800 to G869	Customer cycles: call-up via G-functions with corresponding numbers
G890	Intersection circle/circle
G891	Intersectin line/circle
G892	Rounding corners (3 points)
G893	Rounding corners (2 angles)
G894	Chamfering
G895	Calculation of end point of arc
G896	Transition point arc/arc tangential
G897	End point of straight line
G898	Intersection line/line

M-Codes Bosch CC 100 M

M-Code	Description
M0	Program stop after execution of the block
M2	Main program end, cycle end
M3	Main spindle on CW
M4	Main spindle on CCW
M5	Main spindle stop/coolant off
M6	Call-up of the automatic tool change cycle (cycle 77)
M13	Main spindle on CW, Coolant on
M14	Main spindle on CCW, Coolant on
M19	Orientation of main spindle to fixed position
M19(S…)	Orientation of main spindle to programmable position (degrees)
M21	Call0up of MTB cycle 76
M22	Call-up of MTB cycle 75
M30	Program end with return to beginning (continuation with Cycle Start)
M40	Automatic gear range selection
M41-44	Selection of fixed gear range 1 to 4
M98	SINGLE BLOCK command is not accepted
M99	SINGLE BLOCK command is possible, i.e. the effect of M98 is cancelled

Download Bosch CC 220, CC 120, CC 100 CNC Control Manuals – Free & Multi‑Language Comprehensive M‑Code Reference for NUM 1020/1040/1060T CNC Lathe Controls

CNC Machine

Industrial robot

Industrial equipment