Comprehensive M Code Reference for C.B.Ferrari E560 CNC Machining Center
C.B.Ferrari Elexa E560 M Codes complete list for cnc machinists who work on C.B.Ferrari cnc machining centers.
C.B.Ferrari E560 M Codes
| M Code | Description |
|---|---|
| M1 | Programmed stop. |
| M3 | Clockwise spindle rotation. |
| M4 | Anticlockwise spindle rotation. |
| M5 | Stop spindle. |
| M6 | Manual changing tool (Associate to G99). |
| M7 | Enable coolant 1 (outside water). |
| M8 | Enable coolant 2 (water in the spindle). |
| M9 | Disable coolant. |
| M10 | Enable non-programmed axes locking. |
| M11 | Disable non-programmed axes locking. |
| M13 | M3+M7 |
| M14 | M4+M7 |
| M15 | M3+M8 |
| M16 | M4+M8 |
| M17 | M3+M50 |
| M18 | M4+M50 |
| M19 | Spindle orientation. |
| M20 | Cancels inversion sign on axes (active at the start). |
| M21 | Mirror X axis (Quotas X and I, change G2 in G3 and G41 in G42). |
| M22 | Mirror Y axis (Quotas Y and J, change G2 in G3 and G41 in G42). |
| M23 | Mirror Z axis (Quotas Z and K, change G2 in G3 and G41 in G42). |
| M31 | Allow inversion of the sign (only for quotas X and I). |
| M32 | Allow inversion of the sign (only for quotas Y and J). |
| M33 | Allow inversion of the sign (only for quotas Z and K). |
| M37 | Allow inversion of the sign (only for quotas XY and IJ QX QY). |
| M38 | Allow inversion of the sign (only for quotas XZ and IK QX QZ). |
| M39 | Allow inversion of the sign (only for quotas YZ and JK QY QZ). |
| M40 | Allow low gamma (if it is on tool machine) |
| M42 | Allow high gamma (if it is on tool machine) |
| M50 | Enable coolant 3 (outside air) |
| M51 | Enable coolant 4 (outside air-oil) |
| M52 | Enable coolant 5 (air-oil in the spindle) |
| M53 | Enable coolant 4 (outside oil) |
| M58 | Rotary table revolutions reset |
| M60 | Exit strobe 200 msec for pneumatic table control |
| M80 | General power off |
| M110 | Axis A Cone cleaning |
| M111 | Axis A STOP Cone cleaning |
| M113 | M3+M51 |
| M114 | M4+M51 |
| M115 | M3+M52 |
| M116 | M4+M52 |
| M117 | M3+M53 |
| M118 | M4+M53 |
| M124 | Tools magazine OUT (optional) |
| M125 | Tools magazine IN (optional) |
| M135 | Magazine rotation to the position of tool T.. ( M135 T1 ) |
| M158 | Grip opening (optional) |
| M159 | Grip closing (optional) |
| M177 | Rotable magazine door open |
| M180 | Rotable magazine door close |
| M184 | Tools/pieces magazine OUT (optional) |
| M185 | Tools/pieces magazine IN (optional) |
| M200 | Work time |
| M704 | Tail-stock forward with normal air pressure (optional) |
| M704/1 | Tail-stock forward with reduced air pressure (optional) |
| M705 | Tailstock backward (optional) |
| M708 | Tail-stock locking (optional) |
| M709 | Tailstock releasing (optional) |
| M728 | Disable coolant selector |
| M729 | Enable coolant selector |
| M730 | Machine pneumatic door open (optional) |
Milltronics Centurion 7 Error Codes: Complete Reference for CNC Operators
C.B. Ferrari E560 G-Code Reference – Complete List for CNC Machinists
CNC Machine
- Choosing the Right Coolant for CNC Machining: Types, Benefits, and Maintenance
- Vertical Machining Centers: Choosing the Best Used Units for Your Business
- Advanced CNC Wood Machining Centers for Precision 3D Work
- Maximizing Machining Performance with Effective Coolants
- CNC Machining Centers: Precision & Efficiency for Modern Manufacturing
- Haas CNC Centers: Automatic Programmable Coolant Nozzle for Precise Tool Cooling
- Complete Fanuc M Codes Guide for Fadal Machining Centers
- Mitsubishi CNC G Codes for 700/70 Series Machining Centers – Comprehensive Guide
- Milltronics M Codes: Complete Reference for Advanced Machining Centers
- C.B. Ferrari E560 G-Code Reference – Complete List for CNC Machinists