Complete Fanuc M Codes Guide for Fadal Machining Centers

Fanuc M Codes for Fadal Machining Centers with FANUC Series 18i–MB5 CNC Controls.

Fadal Machining Center

Fanuc M Codes

M00	Program Stop
M01	Optional Program Stop
M02	End-of-Program
M30	End-of-Program
M98	Sub-Program Call
M99	Sub Program End
M03	Spindle Start Forward CW
M04	Spindle Start Reverse CCW
M05	Spindle Stop
M06	Tool Change
M07	Coolant ON – Mist Coolant/Coolant Thru Spindle
M08	Coolant ON – Flood Coolant
M09	Coolant OFF
M11	Set Tool Carousel position to 1 (ATC Tool Changer ONLY)
M19	FANUC canned cycle positioning,(Not for spindle orientation)
M20	Wash Down, Toggle ON/OFF
M20	MIDACO pallet change 1
M20	Does nothing
M22	Chip Conveyor Toggle ON/OFF
M29	Rigid Tap
M41	Low Gear Select
M42	High Gear Select
M48	100% Spindle Speed Override Forced
M49	100% Spindle Speed Override Released
M60	A Axis Brake ON
M61	A Axis Brake OFF
M62	B Axis Brake ON
M63	B Axis Brake OFF
M64	M64/65 Output ON
M65	M64/65 Output OFF
M66	M66/67 Output ON, Chip Conveyor ON
M67	M66/67 Output OFF, Chip Conveyor OFF
M68	M68/69 Output ON, Wash Down ON
M69	M68/69 Output OFF, Wash Down OFF
M78	M78/79 Output ON, Cooled spindle ON
M79	M78/79 Output OFF, Cooled spindle OFF
M80	MIDACO Pallet Changer 2
M85	A Axis Rotary Table Enable
M86	A Axis Rotary Table Disable
M87	B Axis Rotary Table Enable
M88	B Axis Rotary Table Disable
M100	Position Tool Drum to Pocket by T-Word Ex: “M100 T05”
M150	Return the current tool to ATC carousel(ATC ONLY)
M151	Transfer the tool from carousel into spindle.(ATC ONLY)
M190	Spindle Orient for tool changer

CNC Machine