Rexroth A11VG Hydraulic Pump – Industrial Power & Precision

Rexroth is a leading global supplier of components and systems for positioning and control. The product portfolio ranges from the simplest pneumatic and hydraulic products to complete control systems, including controls, software and services. The broad spectrum ranges from low-level products such as pistons, cylinders, motors and valves to medium-level products such as gear units, chains and drives up to high-level products such as steering systems, structural systems and complete vehicles.

The product range also includes the areas of medical technology, oil & gas technology, heavy industry and distribution technology.

Rexorth A11VG Hydraulic Pump can be used in mobile and industrial applications such as machine tools, automation systems and presses.

Rexroth A11VG Hydraulic Pump can be used in mobile and industrial applications such as machine tools, automation systems and presses. It is suitable for applications with medium pressure requirements up to 400 bar (5500 psi). The A11VG is available in both open and enclosed versions, depending on the application. The new Rexroth A11VG has been designed for use with the DIN 24640 standard flange connections for hydraulic motors.

Rexroth A11VG Hydraulic Pump uses a compact design with proven characteristics from its predecessor, the Rexroth A11VH/A11VH2. This allows for a high degree of compatibility between the two series of pumps.

Rexorth A11VG Hydraulic Pump For Industrial Applications

Rexroth has continuously improved the design of the A11VG pumps to provide better sealing, improved shaft quality, increased temperature ranges for operation.

The Rexroth A11VG series hydraulic pumps are compact and robustly constructed. They are suitable for a wide variety of applications where high reliability is required.

The Rexroth A11VG series hydraulic pumps operate at a wide range of speeds and have a large flow capacity with low noise emissions. The standard pump designs are available in vertical or horizontal configurations.

The A11VG series hydraulic pumps are designed for mounting on open-type or enclosed base plates as well as for direct mounting on machine frames. The high-performance oil seals used in these pumps ensure long service life even under extreme operating conditions.

These pumps can be equipped with an integral suction strainer to remove foreign particles from the oil before it enters the pump intake valve. This strainer is designed so that it can be removed from the housing without disassembly of other components during routine maintenance operations or when cleaning out the accumulated dirt from inside the pump housing.

Rexroth provides different mounting options for these pumps. This helps in making them compatible with various installations types. The common mounting options are 3-bolt face type and 4-bolt face type flange.

Rexroth A11VG Hydraulic Pumps are for high pressure duties, with the ability to handle up to 12 bar (150 psi) pressure and temperatures up to 130°C. They feature a low profile design that allows for installation in limited space applications such as construction equipment, agricultural machinery and industrial machines.

Rexroth A11VG Hydraulic Pumps are made from high quality materials that ensure durability and long life. They have an aluminum housing and thermoplastics impeller which offers resistance to corrosion and abrasion. The hydraulic pump also has a sealed bearing that prevents contaminants from entering the oil chamber.

The A11VG series is suitable for open circuit applications that require high power density such as plastic moulding machines, construction machinery and blow moulding machines.

Rexroth offers a wide range of pumps for various applications. The A11VG series is suitable for open circuit applications that require high power density such as plastic moulding machines, construction machinery and blow moulding machines. It is available in four sizes, with maximum pressures up to 10,000 psi (700 bar). The A11VG pump is a single-stage centrifugal pump with an aluminum body, ceramic guide sleeve and wear resistant impeller made of PTFE with steel shaft. The A11VG has been designed for use in harsh industrial environments where corrosion protection is required such as chemical plants or steel mills. Rexroth has an extensive range of hydraulic valves and accessories which can be used for installations in the automotive industry but also in other industries such as agriculture or mining.

The pump uses a unique axial piston design. It has a symmetrical cylinder block which ensures that the motor is mounted on either side of the pump.

The pump uses a unique axial piston design. It has a symmetrical cylinder block which ensures that the motor is mounted on either side of the pump. This allows the customer to mount the pump in any position without having to change the motor, which makes it easier to install. The Rexroth A11VG hydraulic pump is available in single or double acting versions and can handle pressure up to 6,000 bar (87,000 PSI). The A11VG hydraulic pumps are designed for use in severe operating conditions and high temperatures.

Rexroth A11VG Hydraulic Pumps are used in a wide variety of applications including mining, construction, power generation and many more industries where high pressure fluid transfer is required. Rexroth offers extensive technical support for all of their products and services.

Rexroth offers two types of control options namely hydraulic control and mechanical control with electrical feedback.

The hydraulic control system is based on the use of an oil pressure pump, which generates pressure by pumping oil from an oil reservoir. This pressure is then transferred to a hydraulic piston, which acts on a cylinder that transmits motion to the load. The hydraulic pump is usually powered by electricity or compressed air (or both). The advantage of this type of system is that it can be used for multiple applications as it does not require high-pressure fluid supply lines like pneumatic systems do.

Mechanical control with electrical feedback uses a conventional mechanical system but adds an electrical component to provide feedback information about whether the process is operating within predetermined limits. The controller then adjusts the position of a valve or servo motor if necessary to maintain setpoint accuracy.

Rexorth A11VG Hydraulic Pump For Industrial Applications

The Rexorth A11VG Pump is suitable for open circuit applications in industries.

The A11VG is a high pressure, single stage axial piston pump with a fixed displacement. The pump is designed to deliver high flow rates at low pressure and can be used in a variety of applications. The A11VG features a cast iron housing and an aluminum piston that are both extremely durable and reliable. This makes the A11VG ideal for use in harsh environments or for long term projects that require high reliability and durability.

The A11VG has a compact design, making it easy to install even in tight spaces. It also has minimal vibration due to its parallel shaft configuration. It also comes equipped with a large discharge valve which enables fast operation when needed by allowing fluid to pass through quickly without any restrictions or delays in delivery time. This makes it ideal for applications where high pressures are required such as power steering systems or hydraulic brakes on heavy equipment like construction machinery or trucks where you need more stopping power than your brakes alone can provide.

Rexorth is a professional manufacturer of Hydraulic Pump and Pneumatic Gear Pump.We have been in this field for many years, so we’re able to provide you with high-quality products, competitive price and best service.