CRC’s Expert Guide: Safeguard Your Plant for Hurricane Season

As hurricane season approaches, flood‑induced water damage threatens electrical and electronic equipment, costing billions annually. CRC Industries, an ISO 9001:2008‑certified leader in industrial specialty chemicals, has developed a rapid, cost‑effective recovery protocol that protects your assets and keeps your plant operational.

• Clean the equipment by flushing, spraying, or dipping it in clean water, then drain completely.
• Apply CRC’s heavy‑duty degreasers (e.g., Heavy Duty Degreaser or Lectra Clean) to remove oil, grease, and sludge that water alone can’t eliminate. Spray all contaminated surfaces.
• Saturate the equipment with a precision lubricant such as CRC 2‑26 or 3‑36, then drain.
• Measure resistance with a Megger after draining. If the readings fall short of the minimum resistance thresholds, repeat the degreaser and lubricant steps.
• Once the minimum resistance is achieved, clean the contacts with a precision cleaner (e.g., CRC Contact Cleaner 2000, XT‑2000, or QD Contact Cleaner) to remove any residual debris before energizing.

Water damage is just one part of hurricane aftermath. CRC offers a full line of lubricants, greases, and cleaning agents to restore tool performance and protect infrastructure: Chain & Wire Rope Lubricant, Belt Dressing, Air Tool Oil, Bar & Chain Lubricant, Universal 2‑Cycle Oil, and HydroForce cleaners. Additionally, CRC’s Insect Repellent helps control mosquito proliferation after heavy rains.

With decades of experience and a commitment to quality, CRC Industries supplies these products through a nationwide network of electrical and industrial distributors, ensuring reliable access when you need it most.

For more detailed instructions, visit our website at www.crcindustries.com/ei.