Rexroth A10VO Hydraulic Pump – Compact, High‑Torque, Dual‑Stage Solution

The Rexroth A10VO hydraulic pump is a high-torque, two-stage double-flow unit. It is a compact single-acting pump with oil supply from the housing and oil return to the tank. The A 10VO is equipped with a two-stage double-flow piston which allows the pump to reach high torques over a wide speed range of 50 to 1200 rpm. The pump is available in different stroke lengths and mounting positions.

The Rexroth A10VO hydraulic pump has an integrated pressure relief valve that prevents excessive pressure buildup in the system. It also features a self-lubricated bearing for reduced maintenance and extended life.

Rexroth A10VO hydraulic pump series belongs to the variable piston pump type.

The Piston Type Rexroth A10VO hydraulic pump has a compact design that allows for high power density with minimal height. This makes it ideal for use in tight spaces where floor space is limited. This series also offers high durability thanks to its modular design which allows components to be replaced quickly if needed.

Gear Pump Type Rexroth A10VO hydraulic pumps offer both high pressure and high flow rates, making them ideal for applications where high efficiency is required such as in heavy-duty vehicles or construction equipment. This series features an extremely high pressure rating (up to 7,000 bar) which makes it suitable for applications requiring frequent start/stop cycles or frequent reversal of direction without sacrificing performance

Rexorth A10VO Hydraulic Pump Introduction

Rexroth A10VO is a high pressure and high performance pump in the 45 series products, with an excellent cost-performance.

Rexroth A10VO is a high pressure and high performance pump in the 45 series products, with an excellent cost-performance. The pumps are used as a hydraulic pump, electric pump and liquid pump.

The design of Rexroth A10VO is based on the high pressure and high performance of other Rexroth 45 series products. The design of the impeller’s torsional rigidity increases its durability, reducing vibration and noise. The motor housing is designed for easy installation and maintenance. It can be used in the oil field, chemical industry, papermaking industry, pharmaceutical industry and other fields where high pressure liquid circulation is required.

The working principle of Rexroth A10VO is that no matter what the swash plate angle is, the oil quantity of each outlet flow from each cylinder is basically equal.

The hydraulic pump is a kind of closed circuit hydraulic machine, which can convert mechanical energy into hydraulic energy or vice versa. Its working principle is: The rotating shaft of the hydraulic motor turns the eccentric shaft through a gear train and then moves the swash plate back and forth. The swash plate has a number of ports for oil supply, and each port has an adjustable orifice to control its flow rate.

The hydraulic pump consists of four main parts: driving part, displacement part, power transmission part (gear train) and sealing part.

Advantages: Reasonable structure; easy to adjust; stable performance characteristics; long service life; low noise level etc

There are two types of control modes for Rexroth A10VO series pumps: H control mode, F control mode.

H-control mode: The pump speed is controlled by the pressure in the pump chamber; when the pressure increases, the pump speed decreases. When the pressure decreases, so does the pump speed. This type of control mode is used to ensure that the flow rate remains constant even if there is a change in delivery pressure or suction pressure.

F-control mode: The pump speed is controlled by a separate regulator; when there is an increase in delivery pressure, it will automatically increase its speed and vice versa. This type of control mode is used to ensure that there is no change in flow rate even if there are changes in suction pressure or delivery pressure.

The specific formula for calculating the output flow rate of Rexroth A10VO series pump is that q=p x n x η…

The specific formula for calculating the output flow rate of Rexroth A10VO series pump is that q=p x n x η. Where q is the output flow rate (m3/h), p is the pump pressure (MPa), n is the impeller speed (r/min), and η is the specific speed (r/min). The impeller speed can be calculated by using the formula n=70 x Q x V/60. Where Q is the flow rate (m3/h), V is the volumetric efficiency and n=70 r/min.

The volumetric efficiency η can be determined by dividing the actual output flow rate by theoretical output flow rate. The theoretical output flow rate refers to how much fluid would be pumped per revolution at no load conditions, which means that there are no restrictions on fluid flow in any direction or any friction losses within the system whatsoever.

The work pressure adjustment range of Rexroth A10VO series pump can reach 25MPa-32MPa.

The pump is equipped with a high-pressure valve and a low-pressure valve to achieve the desired pressure range. It has a compact structure, small size and light weight, which is suitable for mobile equipment and field operations.

The Rexroth A10VO series single stage plunger pumps have been proven as reliable components in many applications across various industries. The pumps are designed with a compact construction, which allows them to be used in confined spaces where space is limited.

The A10VO single stage plunger pump features an adjustable stroke length from 0 up to 6mm (0-0.2”). It also has a cam locking device for rapid removal or installation of the plunger head without having to loosen the retaining nut or valve shafts as required by other designs. This feature allows for quick repair or replacement of any defective part within minutes without having to remove any other components from the base plate such as springs or retainers which would otherwise be required if using conventional designs that require disassembly before being able to access these critical parts for repair or replacement purposes.

The rated displacement of Rexroth A10VO series pump is from 10ml/r to 250ml/r.

Rexroth A10VO series hydraulic pump is used on many applications in various industries, such as low pressure and high pressure liquid supply, oil lubrication and so on. The pump can also be used for industrial equipment, agricultural machinery, construction machinery, marine machinery and so on.

Rexroth A10VO series hydraulic pump has been widely used worldwide because it can meet the requirements of different industries. It has high reliability and long service life.

You must maintain your original swash plate when you remove the original control block and install our control block.

Rexorth A10VO Hydraulic Pump is made of high quality steel, with standard ISO. It has a high pressure pump with a maximum pressure of 6 bar. The Rexorth A10VO Hydraulic Pump has a hydraulic motor with a maximum output of 0.37 kW and an operating frequency of 1500 rpm. The Rexorth A10VO Hydraulic Pump is equipped with an automatic lubrication system that uses mineral oil as well as a hydraulic motor with a power-to-weight ratio of 1:3, which makes it ideal for all types of applications involving heavy loads (construction machinery, mining equipment).

Rexorth A10VO Hydraulic Pump has been designed for industrial use in order to meet the customer’s needs and expectations. Thanks to its high level of performance, this product will allow you to optimize your production processes while reducing energy consumption and lowering your maintenance costs over time.

Rexorth A10VO Hydraulic Pump Introduction

You can replace the Rexorth A10VO Pump by yourself if needed, but be careful and pay attention to safety production when replacing them.

Rexroth A10VO Hydraulic Pump is a compact, high-performance and reliable hydraulic pump. The pump’s compact design ensures easy installation, and the high pressure will save you energy.

The Rexroth A10VO Hydraulic Pump is made of strong materials like cast iron and steel to ensure its long service life. Its anti-corrosion protection makes it ideal for usage in harsh conditions such as high temperature, large humidity and dust.

Rexroth A10VO Hydraulic Pump has a simple structure with fewer parts to make it easier for maintenance. It also has a high speed and power output to help you get your job done faster than before!

Rexorth hydraulic pump company is a key manufacturer, service provider, and exporter of industrial pumps. With advanced technology and strict quality control system, Rexorth always generates high-quality products to meet customers’ demand. Does your project need Rexorth hydraulic pumps? In brief, Rexorth A10VO Hydraulic Pump Introduction is what you need.