Does your rotating equipment overheat repeatedly or completely seize up? Maybe you have noticed your equipment is making more noise than before. Is your equipment smearing? Is it discolored? Rotating equipment that is not adequately lubricated will not function properly. Adhering to a regular lubric

This is the first of two river pumps HDS is repairing in our shops.  The overall length of this pump is 37-1/2′ and 29,000 pounds. All rotating equipment is disassembled and goes through inspection and analysis.  Once our engineers have determined the best course of action to restore your pump

Don’t forget to stop by and visit us at the Pump/Turbo Symposia at the George R Brown Convention Center in Houston Texas Oct. 1st through the 4th. We can be found at booth #630.

HDS just completed the next evolution in our quest to consistently provide the highest quality rotating equipment repairs in the industry.  We’ve always said what sets us apart is our dedication to the customer and willingness to exceed their expectations. After a great deal of focus and commitment

Documenting all of the procedures required in order to comply with ISO 9001 requirements is an essential part of the process. The quality management system (QMS) documentation is at the core of any ISO 9001 certification, and is the first phase of the work required to gain compliance. There are two

The first step in our preparation for ISO 9001 compliance was the arduous process of documenting all of the essential procedures used within our business. That was only the beginning! After everything had been documented, we began an implementation phase which put our documented procedures to the te

During the final phase of our ISO 9001 project, we continued to focus on implementation of various requirements of the ISO 9001: 2008 standard. There were a number of verifications performed to ensure that our QMS met all specified requirements.   On-Going Implementation Some implementation activiti

While there have been many bumps in the road over the years, since December 2001 Houston Dynamic Service has adopted a quality culture and approach to completing projects that has put them in position as one of the largest independent rotating equipment repair shop in Houston. “Growth and success

HDS has one of the largest and most capable rotating equipment repair facilities in the Gulf Coast area. With our recent ISO 9001compliance certification, our customers know they are receiving the highest quality repairs available by an independent repair and service center. We pride ourselves in ta

Various types of rotating equipment, including pumps, wear over time.  This wear can lead to reductions in critical tolerances and also impact efficiency and overall pump performance.  At that stage, many pump operators make the decision to take the pump out of service for maintenance and repair. T

“I’ve just always liked a new challenge,” says Bobby Martinez, Quality Control Manager with Houston Dynamic Services. fter working more than 33+ years in the pump shop and machine pump industry – 3 of those years at HDS – the company offered Bobby a new opportunity. “I have experience with the entir

With almost 30 years’ experience in pump aftermarket sales and repairs, Tom Sellers brings a wealth of knowledge and experience to the HDS sales team.  “It’s not often you find someone with this combination of actual operations experience combined with sales know-how in the field of rotating equipme

Dating back to 1980, when the original Houston Dynamic Service (HDS) was acquired by the Allis Chalmers Group and then eventually became the Southwest regional service center for Allis Chalmers rotating equipment, we have specialized in the repair and serviceing of the CENTRI-STAK compressor line. T

After taking delivery of a pump in our shop for repair, our general protocol is to disassemble the pump, and then carefully inspect for primary types of wear and tear. This is done prior to the pump being blasted and run through NDT (Non-Destructive Testing) in order to identify potential issues tha

This is Houston Dynamic’s 36’th year to exhibit at the annual Pump/Turbomachinery Symposium at George R. Brown Convention Center in Houston, 9/30 – 10/3.  Sponsored by the Turbomachinery Laboratory at Texas A&M, this event promotes professional development, technology transfer, networking, and i

Here are some of the pump projects we’re working on today. Call us if you want us working on YOUR equipment repair or overhaul project tomorrow! Complete overhaul of a vertical, multi-stage pump for a major petrochemical complex: View 1 Complete overhaul of a vertical, multi-stage pump for a major

Houston Dynamic Service (HDS) was founded in 1976, and is located in Houston, Texas. In 2001, our current President, Clayton Lau, purchased HDS from its previous owner. Because we are an independent aftermarket rotating equipment repair facility, we have the flexibility to not only move quickly, b

For the 40th consecutive year, Houston Dynamic Service (HDS) is excited to announce we will exhibit at the 41st Turbomachinery Symposium located at the George R. Brown Convention Center on September 24-27, 2012. The event is sponsored annually by the Turbomachinery Laboratory of Texas A&M Univer

Manual Machinist (2 openings) Job Description: We are currently looking for 2 Manual Machinist with the ability to operate the following machines: Engine Lathes Vertical Mills Horizontal Mills Skills: Familiarity with Job shop environment Ability to machine a variety of parts. Experience with

From Rock Bottom to Becoming one of the Largest Independent Rotating Equipment Repair Shops Like most companies in the fall of 2001, HDS was at rock bottom.  Between Tropical Storm Allison, which caused extensive flooding and devastation throughout Houston, and the emotional and financial tragedy of