Phenolic NP615 Sheet – Flexible, High‑Resin, Arc‑Resistant Sheet Material

Room temperature punching and shearing grade up to 0.125′′ thick. NP615 is more flexible with lower mechanical properties than NP611. NP615 is produced with high resin content melamine impregnated surfaces to give the resulting laminate better arc resistance.

Properties

General

Property	Value	Testing Standard	Comment
Bonding strength	635 Kg	ASTM D229	Condition A
Density	1.41 g/cm³	ASTM D792
Moisture absorption	3 %	ASTM D570	Condition D₁-24/23

Mechanical

Property	Value	Testing Standard	Comment
Compressive strength	124.1 MPa	ASTM D695	Condition A \| Flatwise
Flexural modulus	6.9 GPa	ASTM D790	Condition A, Transverse
	8.3 GPa	ASTM D790	Condition A
Flexural strength	96.5 MPa	ASTM D790	Condition A, Transverse
	137.9 MPa	ASTM D790	Condition A
Hardness, Rockwell M	89 [-]	ASTM D785
Impact strength, Izod unnotched, ASTM	30 J/m	ASTM D256	Condition E-48/50, Transverse
	31 J/m	ASTM D256	Condition E-48/50
Shear strength	81.4 MPa	ASTM D732	Condition A, Transverse
Tensile strength	86.2 MPa	ASTM D638	Condition A

Thermal

Property	Value	Comment
Relative temperature index, electrical	120 °C	UL Bulletin 746b¹
Relative temperature index, mechanical strength	120 °C	UL Bulletin 746b¹
Arc resistance	110 seconds, ASTM D495, Condition A
Flammability	UL Bulletin 94, Class HB, Condition A

Electrical

Property	Value	Testing Standard	Frequency	Comment
Breakdown voltage	10 kV	ASTM D149		Condition D48/50
	55 kV	ASTM D149		Condition A
Dielectric constant	6.49 [-]	ASTM D150	1MHz	Condition D-24/23
Dielectric strength	27.56 kV/mm	ASTM D149		Condition A
Dissipation factor	0.096 [-]	ASTM D150	1MHz	Condition D-24/23

Technological properties

Property
Application areas	Intended for applications where electrical and moisture requirements are secondary.
Fillers	Paper
Other	1.This temperature is a recommendation only, and based upon experience in various applications. The maximum operating temperature is dependent upon the application and should be investigated prior to use
Supplier Disclaimer	This data, while believed to be accurate and based on reliable analytical methods, is for informational purposes only. The terms and conditions of the agreement under which it is sold will govern any sales of this product. Data supplied above are "typical values"; not to be considered "specification values". To assure the material's performance is adequate for a specific application; customers should verify, independent of Norplex-Micarta, performance characteristics of interest. It is the responsibility of the users of this information to make sure that they have the latest version of this TDB, and are urged to check with Customer Service or, preferably our web site, www.norplex-micarta.com, to determine if the information is the most current available.

NP318 Phenolic Sheet – High-Performance Post-Forming Canvas BP11NPN Phenolic Sheet – High-Performance Impact Strength for Structural Applications

Composite material