DD14 AM FCE: High-Performance Steel for Cold Forming & Deep Drawing
DD14 AM FCE for cold forming and deep drawing applications are characterised by guaranteed maximum yield and tensile strength and minimum elongation.
Properties
General
| Property | Value | Comment |
|---|---|---|
Carbon equivalent (CEV) | 0.15 [-] | max. |
Dimension
| Property | Value |
|---|---|
Dimensions | Please feel free to check the figure on the right side of the material page for more details. |
Mechanical
| Property | Value | Comment |
|---|---|---|
Elongation | 32 % | min. | for thickness 1.5-2 mm | Transverse, A80 |
33 % | min. | for thickness 2-3 mm | Transverse, A80 | |
37 % | min. A5.65√So | for thickness 3-8 mm | Transverse | |
Tensile strength | 290 - 380 MPa | for thickness 1.5-8 mm | Transverse |
Yield strength | 180 - 310 MPa | for thickness 1.5-2 mm | Transverse |
180 - 290 MPa | for thickness 2-8 mm | Transverse |
Chemical properties
| Property | Value | Comment |
|---|---|---|
Aluminium | 0.02 % | max. |
Carbon | 0.08 % | max. |
Manganese | 0.35 % | max. |
Phosphorus | 0.02 % | max. |
Silicon | 0.03 % | max. |
Sulfur | 0.025 % | max. |
Technological properties
| Property | ||
|---|---|---|
| Application areas | This is widely used for bending and drawing applications in general industry, building, the automotive industry and related sectors (e.g. oil sumps for industrial vehicles etc). ArcelorMittal's steels for cold forming and deep drawing applications display good or even excellent performance in all types of deep drawing processes, enabling the production of complex parts. Uncoated hot rolled steels for bending and deep drawing applications are suitable under certain conditions for food contact, as specified in the Regulation (EC) No. 1935/2004 and French standard NF A 36-714. Please contact us for further information on this subject. | |
| Coating | Galvanisation: Class 1 | |
| Other | ArcelorMittal provides guarantees for thicknesses greater than 11 mm. | |
| Welding | The weldability (spot and arc welding) of ArcelorMittal's hot rolled steels for cold forming and deep drawing is equivalent to that of cold rolled steels of corresponding grades. The spot weldability of DD14 AM FCE grade (thickness 2.5 mm) ranges from 9.6 to 12.6 kA. | |
Metal
- Choosing the Right PCB Thickness: Standards, Design, and Manufacturing Factors
- M290-65A AM FCE – Premium Non-Oriented Electrical Steel with EN 10106:2015 Compliance
- DD13 AM FCE – Premium Cold-Forming & Deep Drawing Steel
- DC02 AM FCE: Premium Cold‑Rolled Mild Steel with Superior Strength & Formability
- DD11 AM FCE Steel: Optimal for Cold Forming & Deep Drawing
- DD12 AM FCE: Premium Cold‑Forming Steel with Superior Strength and Ductility
- M900-100A AM FCE – Premium Non-Oriented Electrical Steel with EN 10106:2015 Compliance
- M230-35A AM FCE: High-Performance Non-Oriented Electrical Steel
- DC03 AM FCE: Premium Cold Rolled Mild Steel for Superior Formability
- DC04 AM FCE: EN 10130:2006 Compliant, High‑Strength Cold‑Rolled Mild Steel with Superior Formability