DIN 2393-2 Standard – Grade St 28 Steel: Brightly Drawn, Hard Finish
Properties
General
| Property | Temperature | Value | Comment |
|---|---|---|---|
Density | 23.0 °C | 7.8 - 7.9 g/cm³ | Typical for Low Carbon Steel |
Mechanical
| Property | Temperature | Value | Comment |
|---|---|---|---|
Elastic modulus | 23.0 °C | 200 - 215 GPa | Typical for Low Carbon Steel |
Elongation | 20.0 °C | 8 % | |
Poisson's ratio | 23.0 °C | 0.29 [-] | Typical for Low Carbon Steel |
Shear modulus | 23.0 °C | 82 GPa | Typical for Low Carbon Steel |
Tensile strength | 20.0 °C | 400 MPa |
Thermal
| Property | Temperature | Value | Comment |
|---|---|---|---|
Coefficient of thermal expansion | 23.0 °C | 1.32E-5 - 1.38E-5 1/K | Typical for Low Carbon Steel |
Max service temperature | 500 °C | Typical for Carbon Steel | |
Melting point | 1480 - 1526 °C | Typical for Low Carbon Steel | |
Specific heat capacity | 23.0 °C | 465 J/(kg·K) | Typical for Low Carbon Steel |
Thermal conductivity | 23.0 °C | 25 - 93 W/(m·K) | Typical for Low Carbon Steel |
Electrical
| Property | Temperature | Value | Comment |
|---|---|---|---|
Electrical resistivity | 23.0 °C | 1.43E-7 - 1.74E-7 Ω·m | Typical for Carbon Steel |
Magnetic
| Property | Value | Comment |
|---|---|---|
Curie temperature | 770 °C | Typical for Low Carbon Steel |
Chemical properties
| Property | Value |
|---|---|
Carbon | 0.13 % |
Phosphorus | 0.05 % |
Sulfur | 0.05 % |
Metal
- DIN 2393-2 Grade USt 34-2: Brightly Drawn, Hardened Low‑Carbon Steel – Technical Specs
- DIN 2393-2 Grade USt 28: Bright, Drawn, Hardened Low‑Carbon Steel
- DIN 2393-2 RSt 28: Bright-Drawn Hard Low-Carbon Steel with Superior Mechanical Properties
- DIN 2393-2 Grade St 34-2 Bright Drawn Hard Steel – Technical Specs & Performance
- DIN 2393-2 Grade USt 37-2: Brightly Drawn Hard Steel – Technical Specifications
- DIN 2393-2 Grade St 37‑2 – Bright Drawn, Hardened Low‑Carbon Steel
- DIN 2393-2 Grade RSt 34-2: Bright Drawn Hard Steel Tubes for Precision Construction
- DIN 2393-2 Grade RSt 37‑2: Bright‑Drawn, Hard‑Welded Precision Steel Tubes
- DIN 2393-2 Grade St 44-2: Bright Drawn Hard Steel Tube – Precision Welding
- DIN 2393-2 Grade St 52-3 Bright Drawn Hard Steel Tube – Precision Welded, High-Quality Surface