EN 10106 Grade M270-50A – Premium Non‑Oriented Electrical Steel
Non-oriented fully processed electrical steel have guaranteed magnetic properties, in accordance with (or exceeding the levels required by) EN 10106:2015. As well as the maximum loss and minimum polarisation levels cited, full magnetic characterisation curves regarding losses, polarisation, permeability and apparent power at different frequencies are available on request.
This standard grade is available so that a steel grade can be selected according to the specific requirements of each application, from low alloy grades offering the advantage of excellent magnetic permeability, thermal conductivity and punchability to alloyed grades offering the advantage of very low losses, even at higher frequencies. A wide range of coatings is available, allowing further enhancement of punchability, reduction of interlaminar losses and improvement of corrosion protection.
Properties
General
| Property | Value | Comment |
|---|---|---|
Density | 7.6 g/cm³ | for thickness 0.5 mm |
Mechanical
| Property | Value | Comment |
|---|---|---|
Elongation | 15 - 25 % | for thickness 0.5 mm | Transverse | A80 |
Hardness, Vickers | 200 - 230 [-] | for thickness 0.5 mm |
Number of bends | 2 [-] | min. for thickness 0.5 mm | Guaranteed |
Tensile strength | 540 - 590 MPa | for thickness 0.5 mm | Transverse |
Yield strength | 420 - 470 MPa | for thickness 0.5 mm | Transverse |
Yield to strength ratio | 0.75 - 0.8 [-] | for thickness 0.5 mm |
Magnetic
| Property | Value | Frequency | Comment |
|---|---|---|---|
Anisotropy of loss | 17 % | (+/-) for thickness 0.5 mm | Guaranteed | |
Guaranteed core loss | 2.7 W/kg | 50Hz | max. for thickness 0.5 mm | at 1.5 T |
Guaranteed polarization | 1.49 [-] | min. | for thickness 0.5 mm | at 2500 A/m | |
1.6 [-] | min. | for thickness 0.5 mm | at 5000 A/m | ||
1.7 [-] | min. | for thickness 0.5 mm | at 10000 A/m | ||
Stacking factor | 0.96 mm | min. | for thickness 0.5 mm | Guaranteed | |
Typical core loss | 1.1 W/kg | 50Hz | max. for thickness 0.5 mm | at 1 T |
3.47 W/kg | 60Hz | max. for thickness 0.5 mm | at 1.5 T |
Technological properties
| Property | ||
|---|---|---|
| Application areas | The fully processed steel is designed for the manufacture of magnetic circuits for motors, transformers and other electrical equipment. The principal applications are in the electrical engineering, domestic appliance, automotive and building industries. Low loss fully processed steels are also suitable for shielding applications at low frequencies (e.g. housings around electrical systems). | |
| Coating | This standard grade is available non-insulated or varnished with any of the coating types described in the following link https://industry.arcelormittal.com/catalogue/D28/EN . | |
| Other | Recommendations for use The are obtained without heat treatment after stamping. The material as supplied possesses all the required magnetic properties. | |
Metal
- EN 10106 Grade M310-65A – Premium Non-Oriented Electrical Steel
- EN 10106 Grade M330-65A: Premium Non-Oriented Electrical Steel with Guaranteed Magnetic Performance
- EN 10106 Grade M350-65A – Premium Non-Oriented Electrical Steel with Certified Magnetic Performance
- EN 10106 Grade M400-65A – High‑Performance Non‑Oriented Electrical Steel
- EN 10106 Grade M470-65A – Premium Non-Oriented Electrical Steel with Guaranteed Magnetic Performance
- EN 10106 M530-65A Non-Oriented Electrical Steel – Guaranteed Magnetic Performance
- EN 10106 Grade M600-65A: Premium Non-Oriented Electrical Steel with Guaranteed Magnetic Performance
- EN 10106 Grade M700-65A: High-Performance Non-Oriented Electrical Steel
- EN 10106 Grade M800-65A – Certified Non‑Oriented Electrical Steel with Superior Magnetic Performance
- EN 10106 Grade M1000-65A – High-Performance Non-Oriented Electrical Steel