AW-1350A F – EN 573-3 Grade Aluminum Alloy Spec
Properties
General
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Density | 2.7 g/cm³ | F | EN 573-3, EN 14121 | Strip, Sheet, Plate |
Mechanical
| Property | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|
Elastic modulus | 70.0 GPa | F | EN 573-3, EN 14121 | Strip, Sheet, Plate | |
Plane-Strain Fracture Toughnes | 22.0 - 35.0 MPa·√m | Typical for Wrought 1000 Series Aluminium | |||
Poisson's ratio | 0.33 [-] | Typical for Wrought 1000 Series Aluminium | |||
Shear modulus | 25.9 GPa | Typical for Wrought 1000 Series Aluminium | |||
Tensile strength | 65.0 MPa | F | EN 573-3, EN 14121 | Strip, Sheet, Plate |
Thermal
| Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|---|
Coefficient of thermal expansion | 20 °C | 2.35e-05 1/K | F | EN 573-3, EN 14121 | Strip, Sheet, Plate | |
100 °C | 2.35e-05 1/K | F | EN 573-3, EN 14121 | Strip, Sheet, Plate | ||
Melting point | 658.0 °C | F | EN 573-3, EN 14121 | Strip, Sheet, Plate | ||
Specific heat capacity | 900.0 - 963.0 J/(kg·K) | Typical for Wrought 1000 Series Aluminium | ||||
Thermal conductivity | 230 W/(m·K) | F | EN 573-3, EN 14121 | Strip, Sheet, Plate |
Electrical
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Electrical conductivity | 34500000.0 - 35500000.0 S/m | F | EN 573-3, EN 14121 | Strip, Sheet, Plate |
Electrical resistivity | 2.82e-08 - 2.9e-08 Ω·m | F | EN 573-3, EN 14121 | Strip, Sheet, Plate |
Chemical properties
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Aluminium | 99.5 % | F | EN 573-3, EN 14121 | Strip, Sheet, Plate |
Copper | 0.02 % | F | EN 573-3, EN 14121 | Strip, Sheet, Plate |
Iron | 0.40 % | F | EN 573-3, EN 14121 | Strip, Sheet, Plate |
Magnesium | 0.05 % | F | EN 573-3, EN 14121 | Strip, Sheet, Plate |
Silicon | 0.25 % | F | EN 573-3, EN 14121 | Strip, Sheet, Plate |
Zinc | 0.05 % | F | EN 573-3, EN 14121 | Strip, Sheet, Plate |
Technological properties
| Property | ||
|---|---|---|
| Anodizing | decorative: gut (EQ: sehr gut), Protective: very good | |
| Brazing | hard brazing (with flux/ without flux): very good / very good, friction soldering: very good, soft brazing with flux: very good, general: very good | |
| Corrosion properties | Seawater: acceptable, weathering: good | |
| Workability | Bending / Spinning (cold): very good / very good, Impact extrusion (cold): very good, Deep drawing / upsetting (Condition) very good (H14) / very good (H12) | |
Metal
- EN 573-3 Grade 3.0505 F Aluminium Alloy: Properties & Standards
- EN 573-3 Grade 3.1305 F Aluminium Alloy – Key Mechanical Properties
- EN 573-3 Grade 3.1305 O Aluminium: Key Mechanical Properties & Standards
- EN 573-3 Grade 3.1305 O3 – Comprehensive Aluminium Alloy Specifications
- EN 573-3 Grade 3.3316 F – Key Properties & Standards for 5000 Series Aluminium
- EN 573-3 Grade 3.3549 F – Premium Aluminum Alloy with Expert R&D Support
- EN 573-3 AW‑1090 F Aluminium: Technical Specifications & Standards
- AW-5356 F Aluminum Alloy – EN 573‑3 Specification & Key Mechanical Properties
- EN 573-3 Grade AW-5356 O3 Aluminium Alloy – Key Properties & Standards
- AW-5183 O3 Aluminium Alloy – EN 573-3 Grade & Key Properties