DIN 1651 Grade 9SMn28 Cold‑Drawn & Stress‑Relieved Steel – Superior for Mass‑Turning Tools
Balanced machining steel 9 SMn 28 is the standard grade for all mass turning tools and should be the substitution of the 9 S 20. The steel is suited for thin walled parts and little cold forming. Application: automotive engineering, toolbuilding, apparatus engineering
Properties
General
| Property | Temperature | Value |
|---|---|---|
Density | 20.0 °C | 7.85 g/cm³ |
Mechanical
| Property | Temperature | Value |
|---|---|---|
Elastic modulus | -100.0 °C | 217 GPa |
20.0 °C | 210 - 212 GPa | |
100.0 °C | 207 GPa | |
200.0 °C | 193 - 199 GPa | |
300.0 °C | 185 - 192 GPa | |
400.0 °C | 175 - 184 GPa | |
500.0 °C | 175 GPa | |
600.0 °C | 164 GPa | |
Poisson's ratio | 20.0 °C | 0.28 [-] |
25.0 °C | 0.28 - 0.29 [-] | |
Shear modulus | 20.0 °C | 81 GPa |
Tensile strength | 20.0 °C | 550 MPa |
Thermal
| Property | Temperature | Value | Comment |
|---|---|---|---|
Coefficient of thermal expansion | -100.0 °C | 1.08E-5 1/K | |
20.0 °C | 1.19E-5 1/K | ||
100.0 °C | 1.1E-5 - 1.25E-5 1/K | ||
200.0 °C | 1.18E-5 - 1.3E-5 1/K | ||
300.0 °C | 1.36E-5 1/K | ||
400.0 °C | 1.32E-5 - 1.41E-5 1/K | ||
500.0 °C | 1.45E-5 1/K | ||
600.0 °C | 1.49E-5 1/K | ||
Max service temperature | 500 °C | Typical for Carbon Steel | |
Melting point | 1480 - 1526 °C | Typical for Low Carbon Steel | |
Specific heat capacity | -100.0 °C | 423 J/(kg·K) | |
20.0 °C | 460 - 461 J/(kg·K) | ||
100.0 °C | 479 - 480 J/(kg·K) | ||
200.0 °C | 499 - 520 J/(kg·K) | ||
300.0 °C | 517 J/(kg·K) | ||
400.0 °C | 536 - 610 J/(kg·K) | ||
500.0 °C | 558 J/(kg·K) | ||
600.0 °C | 587 J/(kg·K) | ||
Thermal conductivity | 20.0 °C | 54.4 - 57.5 W/(m·K) | |
100.0 °C | 55.7 W/(m·K) | ||
200.0 °C | 51.9 W/(m·K) | ||
300.0 °C | 47.6 W/(m·K) | ||
400.0 °C | 43.4 W/(m·K) | ||
500.0 °C | 39.6 W/(m·K) | ||
600.0 °C | 36 W/(m·K) | ||
Thermal diffusivity | 20.0 °C | 15.9 mm²/s | |
100.0 °C | 14.3 mm²/s | ||
200.0 °C | 12.5 mm²/s | ||
300.0 °C | 10.8 mm²/s | ||
400.0 °C | 9.2 mm²/s | ||
500.0 °C | 7.6 mm²/s | ||
600.0 °C | 6.1 mm²/s | ||
Electrical
| Property | Temperature | Value |
|---|---|---|
Electrical resistivity | 20.0 °C | 1.1E-7 Ω·m |
100.0 °C | 2.3E-7 Ω·m | |
200.0 °C | 3.04E-7 Ω·m | |
300.0 °C | 3.94E-7 Ω·m | |
400.0 °C | 5.01E-7 Ω·m | |
500.0 °C | 6.25E-7 Ω·m | |
600.0 °C | 7.7E-7 Ω·m | |
Magnetic
| Property | Value | Comment |
|---|---|---|
Curie temperature | 770 °C | Typical for Low Carbon Steel |
Chemical properties
| Property | Value |
|---|---|
Carbon | 0.14 % |
Manganese | 0.9 - 1.3 % |
Phosphorus | 0.1 % |
Silicon | 0.05 % |
Sulfur | 0.27 - 0.33 % |
Metal
- DIN 1651 Grade 35SPb20 – Cold‑Drawn, Stress‑Relieved Steel
- DIN 1651 Grade 45SPb20 – Cold‑Drawn, Stress‑Relieved Steel for Automotive & Tooling
- DIN 1651 Grade 60SPb20 Cold-Drawn, Stress-Relieved Steel for High-Strength Applications
- DIN 1651 Grade 35S20: Cold Drawn & Stress‑Relieved Steel for High‑Performance Applications
- DIN 1651 Grade 45S20 Steel – Cold‑Drawn & Stress‑Relieved for High Strength Applications
- DIN 1651 Grade 60S20 Cold Drawn & Stress‑Relieved Steel – High Strength, Precision Machining
- DIN 1651 Grade 10SPb20 – Cold Drawn & Stress‑Relieved Machining Steel for Automotive Parts
- DIN 1651 Grade 9SMnPb28 Cold-Drawn, Stress-Relieved Steel – Superior Cutting Performance & Surface Quality
- DIN 1651 Grade 9 SMnPb36 Cold‑Drawn & Stress‑Relieved Steel – Optimal for High‑Performance Machining
- DIN 1651 Grade 15S10 Cold‑Drawn & Stress‑Relieved Steel – High Toughness for Automotive & Tooling