High-Performance G.AL® C210R Aluminum Cast Plate – Precision Sawn & Molded
A medium-strength aluminum plate, G.AL® C210R is the all-rounder of aluminum materials. The G.AL® C210R sawn on all sides is characterized by extremely low-stress properties, dimensional stability and excellent homogeneity over the entire ingot cross section. Based on alloy EN AW 5083 (AlMg4.5Mn0.7), G.AL® C210R is corrosion-resistant to a large extent and can be technically anodized very well. With an slab thickness of up to 42.1 in. and width up to 85.0 in. large-scale projects can be also be realized.
Properties
General
| Property | Temperature | Value |
|---|---|---|
Density | 23.0 °C | 2.66 g/cm³ |
Surface roughness | 15 μm |
Dimension
| Property | Value |
|---|---|
Width | 1520 mm |
Dimensions | Standard stock sizes: 1520mm x 3020mm, 1570mm x 3670mm, 2160mm x 4000mm and 20-1070mm in thickness |
Mechanical
| Property | Temperature | Value | Comment |
|---|---|---|---|
Elastic modulus | 23.0 °C | 70 GPa | |
Elongation A5 | 23.0 °C | 10 - 15 % | |
Hardness, HBW | 23.0 °C | 68 - 75 [-] | Test method: 2.5/62.5 |
Tensile strength | 23.0 °C | 230 - 290 MPa | |
Yield strength Rp0.2 | 23.0 °C | 110 - 130 MPa |
Thermal
| Property | Temperature | Value |
|---|---|---|
Coefficient of thermal expansion | 23.0 °C | 2.33E-5 1/K |
Specific heat capacity | 23.0 °C | 900 J/(kg·K) |
Thermal conductivity | 23.0 °C | 110 - 130 W/(m·K) |
Electrical
| Property | Temperature | Value |
|---|---|---|
Electrical conductivity | 23.0 °C | 1.60E+7 - 1.80E+7 S/m |
Technological properties
| Property | ||
|---|---|---|
| Other | Non heat treatable | |
| Processing history | Temper: O3, homogenized and stress relieved | |
Metal
- Cast Iron vs Cast Steel: Key Differences and Use Cases
- Wrought Iron vs Cast Iron: Key Differences Explained
- Discover the Premier MIC-6 Tooling Plate Aluminum for Unmatched Stability and Consistency
- Alloy 31 Stainless Steel Plate – Superior Strength & Ductility for Extreme Environments
- G.AL® 7075GF High-Strength Rolled Aluminum Plate – Precision-Finished for Rapid Machining
- G.AL® C250 ELOX PLUS – Precision‑Milled Aluminum Plate for Superior Anodizing
- Aluminum Cast Plate G.AL® C330 – Precision‑Milled, High‑Strength Material
- G.AL® C330R Aluminium Cast Plate – Precision Sawed for High‑Strength Applications
- High-Performance G.AL® C250 Aluminum Cast Plate – Precision Milled & Flat
- Alloy 52 Plate – High-Performance Nickel-Iron Composite for Industrial Applications