EN 573-3 Grade 3.3316 H26 Steel – Specifications & Mechanical Properties
Properties
General
| Property | Value | Condition | Related Standards |
|---|---|---|---|
Density | 2.68 g/cm³ | H26 | EN 573-3, EN 485 |
2.69 g/cm³ | H26 | EN 573-3, EN 485 |
Mechanical
| Property | Value | Condition | Related Standards | Comment |
|---|---|---|---|---|
Bending angle 90° | 1.0 °/t | H26 | EN 573-3, EN 485 | |
1.5 °/t | H26 | EN 573-3, EN 485 | ||
2.5 °/t | H26 | EN 573-3, EN 485 | ||
3.0 °/t | H26 | EN 573-3, EN 485 | ||
Elastic modulus | 69.0 GPa | H26 | EN 573-3, EN 485 | |
70.0 GPa | H26 | EN 573-3, EN 485 | ||
Hardness, Brinell | 60.0 [-] | H26 | EN 573-3, EN 485 | |
Plane-Strain Fracture Toughnes | 22.0 - 35.0 MPa·√m | Typical for Wrought 5000 Series Aluminium | ||
Poisson's ratio | 0.33 [-] | Typical for Wrought 5000 Series Aluminium | ||
Shear modulus | 26.0 - 26.5 GPa | Typical for Wrought 5000 Series Aluminium | ||
Tensile strength | 195.0 - 235.0 MPa | H26 | EN 573-3, EN 485 |
Thermal
| Property | Temperature | Value | Condition | Related Standards | Comment |
|---|---|---|---|---|---|
Coefficient of thermal expansion | 20 °C | 2.38e-05 1/K | H26 | EN 573-3, EN 485 | |
100 °C | 2.38e-05 1/K | H26 | EN 573-3, EN 485 | ||
Max service temperature | 150.0 °C | Typical for Wrought 5000 Series Aluminium | |||
Melting point | 620.0 - 650.0 °C | H26 | EN 573-3, EN 485 | ||
625.0 - 650.0 °C | H26 | EN 573-3, EN 485 | |||
Specific heat capacity | 879.0 - 963.0 J/(kg·K) | Typical for Wrought 5000 Series Aluminium | |||
Thermal conductivity | 170.0 - 190.0 W/(m·K) | H26 | EN 573-3, EN 485 | ||
193 W/(m·K) | H26 | EN 573-3, EN 485 |
Electrical
| Property | Value | Condition | Related Standards |
|---|---|---|---|
Electrical conductivity | 23000000.0 - 26000000.0 S/m | H26 | EN 573-3, EN 485 |
29000000.0 S/m | H26 | EN 573-3, EN 485 | |
Electrical resistivity | 3.45e-08 Ω·m | H26 | EN 573-3, EN 485 |
3.85e-08 - 4.35e-08 Ω·m | H26 | EN 573-3, EN 485 |
Chemical properties
| Property | Value | Condition | Related Standards |
|---|---|---|---|
Chromium | 0.1 % | H26 | EN 573-3, EN 485 |
Copper | 0.05 % | H26 | EN 573-3, EN 485 |
Iron | 0.45 % | H26 | EN 573-3, EN 485 |
Magnesium | 1.1 - 1.7 % | H26 | EN 573-3, EN 485 |
Manganese | 0.15 % | H26 | EN 573-3, EN 485 |
Silicon | 0.4 % | H26 | EN 573-3, EN 485 |
Zinc | 0.2 % | H26 | EN 573-3, EN 485 |
Technological properties
| Property | ||
|---|---|---|
| Workability | Good workability. | |
Metal
- EN 573-3 Grade 3.0915 H26 Aluminium Alloy – Key Properties & Standards
- EN 573-3 Grade 3.3316 F – Key Properties & Standards for 5000 Series Aluminium
- EN 573-3 Grade 3.3316 H44 Aluminium – Detailed Properties
- EN 573-3 Grade 3.3316 H46 – Aluminum Alloy Properties
- EN 573-3 Grade 3.3316 H48 Aluminum Alloy – Key Properties & Standards
- EN 573-3 Grade 3.3316 H49 – Key Material Specs & Standards
- EN 573-3 Grade 3.0505 H26 – Aluminum Alloy Properties & Standards
- AW‑1350 H26 Aluminum Alloy – EN 573‑3 Grade Specifications & Properties
- EN 573-3 Grade 3.0257 H26 – Premium Aluminum Alloy Properties
- EN 573-3 Grade 3.3315 (H26) – Standard Aluminum Alloy