AA Standard Grade 3105 H26 Aluminium – Properties & Specifications
Properties
General
| Property | Value | Condition | Related Standards |
|---|---|---|---|
Density | 2.72 g/cm³ | H26 | AA Standards, ASTM B209 |
Mechanical
| Property | Value | Condition | Related Standards | Comment |
|---|---|---|---|---|
Elastic modulus | 69.0 GPa | H26 | AA Standards, ASTM B209 | |
Plane-Strain Fracture Toughnes | 22.0 - 35.0 MPa·√m | Typical for Wrought 3000 Series Aluminium | ||
Poisson's ratio | 0.33 [-] | Typical for Wrought 3000 Series Aluminium | ||
Shear modulus | 25.0 - 26.0 GPa | Typical for Wrought 3000 Series Aluminium | ||
Tensile strength | 170.0 MPa | H26 | AA Standards, ASTM B209 |
Thermal
| Property | Temperature | Value | Condition | Related Standards | Comment |
|---|---|---|---|---|---|
Coefficient of thermal expansion | 20 °C | 2.36e-05 1/K | H26 | AA Standards, ASTM B209 | |
100 °C | 2.36e-05 1/K | H26 | AA Standards, ASTM B209 | ||
Melting point | 635.0 - 655.0 °C | H26 | AA Standards, ASTM B209 | ||
Specific heat capacity | 893.0 - 920.0 J/(kg·K) | Typical for Wrought 3000 Series Aluminium | |||
Thermal conductivity | 172 W/(m·K) | H26 | AA Standards, ASTM B209 |
Electrical
| Property | Value | Condition | Related Standards |
|---|---|---|---|
Electrical conductivity | 26000000.0 S/m | H26 | AA Standards, ASTM B209 |
Electrical resistivity | 3.85e-08 Ω·m | H26 | AA Standards, ASTM B209 |
Chemical properties
| Property | Value | Condition | Related Standards |
|---|---|---|---|
Chromium | 0.2 % | H26 | AA Standards, ASTM B209 |
Copper | 0.3 % | H26 | AA Standards, ASTM B209 |
Iron | 0.70 % | H26 | AA Standards, ASTM B209 |
Magnesium | 0.2 - 0.8 % | H26 | AA Standards, ASTM B209 |
Manganese | 0.3 - 0.8 % | H26 | AA Standards, ASTM B209 |
Silicon | 0.6 % | H26 | AA Standards, ASTM B209 |
Titanium | 0.1 % | H26 | AA Standards, ASTM B209 |
Zinc | 0.4 % | H26 | AA Standards, ASTM B209 |
Technological properties
| Property | ||
|---|---|---|
| Brazing | general: possible with commercial processes and methods | |
| Corrosion properties | Stress corrosion cracking: no damage during operation and laboratory tests, general: very good, without protection in industrial or seawater atmosphere | |
| General machinability | General: not suitable (O, H12), poor (H14, H25, H16, H18) | |
| Workability | general (condition): good (O), acceptable (H12, H14, H25), poor(H16, H18) | |
Metal
- AA Standard Grade 5010 H26 – Aluminium Properties & Specifications
- AA 1060 H26 Aluminium – ASTM B209 Standards and Properties
- AA Standards for Grade 3004 H26 Aluminium: Key Properties & Performance
- Grade 3105 H12 Aluminium Alloy – Comprehensive AA Standards Overview
- AA Standards Grade 3105 H14: Key Aluminium Mechanical Properties
- AA Standards Grade 3105 H16 – Key Mechanical & Physical Properties
- AA Standards Grade 3105 H18 – Detailed Properties & Mechanical Performance
- AA Standard Grade 3105 H24 – Key Mechanical Properties & Specifications
- AA 3105 H25: Key Mechanical Properties & ASTM Standards
- AA Standards Grade 3105 O – Key Mechanical and Physical Properties