AW-5010 F Aluminium Alloy – EN 573-3 Grade, Specifications & Properties
Naturally hard AlMg alloy. The alloy is not food safe.
Properties
General
| Property | Temperature | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|---|
Density | 2.71 g/cm³ | F | EN 573-3, EN 485 | Strip, Sheet, Plate | |
20.0 °C | 2.7 g/cm³ | F | EN 573-3 | Flat |
Mechanical
| Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|---|
Elastic modulus | 69.0 - 70.0 GPa | Typical for Wrought 5000 Series Aluminium | ||||
Plane-Strain Fracture Toughnes | 22.0 - 35.0 MPa·√m | Typical for Wrought 5000 Series Aluminium | ||||
Poisson's ratio | 0.33 [-] | Typical for Wrought 5000 Series Aluminium | ||||
Shear modulus | 20.0 °C | 27.0 | F | EN 573-3 | Flat | |
Tensile strength | 90.0 MPa | F | EN 573-3, EN 485 | Strip, Sheet, Plate | ||
20.0 °C | 90.0 MPa | F | EN 573-3 | Flat | Transverse | |
20.0 °C | 90.0 MPa | F | EN 573-3 | Flat |
Thermal
| Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|---|
Coefficient of thermal expansion | 2.2e-05 - 2.5e-05 1/K | Typical for Wrought 5000 Series Aluminium | ||||
Max service temperature | 150.0 °C | Typical for Wrought 5000 Series Aluminium | ||||
Melting point | 560.0 - 655.0 °C | Typical for Wrought 5000 Series Aluminium | ||||
Specific heat capacity | 879.0 - 963.0 J/(kg·K) | Typical for Wrought 5000 Series Aluminium | ||||
Thermal conductivity | 20.0 °C | 215.0 W/(m·K) | F | EN 573-3 | Flat |
Electrical
| Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|---|
Electrical conductivity | 20.0 °C | 35000000.0 | F | EN 573-3 | Flat | |
Electrical resistivity | 3.3e-08 - 5e-08 Ω·m | Typical for Wrought 5000 Series Aluminium |
Chemical properties
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Chromium | 0.15 % | F | EN 573-3, EN 485 | Flat, Strip, Sheet, Plate |
Copper | 0.25 % | F | EN 573-3, EN 485 | Flat, Strip, Sheet, Plate |
Iron | 0.7 % | F | EN 573-3 | Flat |
0.70 % | F | EN 573-3, EN 485 | Strip, Sheet, Plate | |
Magnesium | 0.2 - 0.6 % | F | EN 573-3, EN 485 | Flat, Strip, Sheet, Plate |
Manganese | 0.1 - 0.3 % | F | EN 573-3, EN 485 | Flat, Strip, Sheet, Plate |
Silicon | 0.4 % | F | EN 573-3, EN 485 | Flat, Strip, Sheet, Plate |
Titanium | 0.1 % | F | EN 573-3, EN 485 | Flat, Strip, Sheet, Plate |
Zinc | 0.3 % | F | EN 573-3, EN 485 | Flat, Strip, Sheet, Plate |
Technological properties
| Property | ||
|---|---|---|
| Workability | Good workability. | |
Metal
- AW-5010 H46 Aluminum Alloy – EN 573-3 Grade, 5000 Series
- AW-5010 H48 – EN 573-3 Grade Aluminium Alloy (AlMg)
- AW-5010 H42 Aluminum Alloy – EN 573-3 Grade – High-Performance Structural Metal
- AW‑5010 H44 – EN 573‑3 Certified Aluminium Alloy for High‑Strength Applications
- EN 573-3 Grade AW‑5010 H45 – High‑Strength AlMg Alloy for Industrial Use
- AW‑5010 H19 Aluminium Alloy – EN 573‑3 Grade, High-Strength 5000 Series
- AW-5010 H18 (EN 573-3) High-Strength Al‑Mg Alloy – Specifications & Properties
- AW-5010 H28 – EN 573-3 Grade AlMg Alloy: High Strength & Heat Resistance
- EN 573-3 AW‑5010 H111 Aluminium‑Magnesium Alloy – Technical Specifications & Properties
- AW-5010O AlMg Alloy (EN 573-3) – 5% Magnesium, Non‑Food Safe, 5000 Series Properties