AW-6060 T89 Aluminum Alloy – EN 573-3 Grade
Age-hardenable AlMgSi alloy. The alloy is food safe.
Additional services: Cuttings, Parts from drawingsProperties
General
| Property | Temperature | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|---|
Density | 2.7 g/cm³ | T89 | EN 573-3, EN 1301 | Strip, Sheet, Plate, Tube, Bar | |
20.0 °C | 2.7 g/cm³ | T89 | EN 573-3 | Wire |
Mechanical
| Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|---|
Elastic modulus | 69.5 GPa | T89 | EN 573-3, EN 1301 | Strip, Sheet, Plate, Tube, Bar | ||
20.0 °C | 67.0 GPa | T89 | EN 573-3 | Wire | ||
Plane-Strain Fracture Toughnes | 22.0 - 35.0 MPa·√m | Typical for Wrought 6000 Series Aluminium | ||||
Poisson's ratio | 0.33 [-] | Typical for Wrought 6000 Series Aluminium | ||||
Shear modulus | 26.1 GPa | T89 | EN 573-3, EN 1301 | Strip, Sheet, Plate, Tube, Bar | ||
20.0 °C | 25.0 GPa | T89 | EN 573-3 | Wire | ||
Tensile strength | 260.0 MPa | T89 | EN 573-3, EN 1301 | Strip, Sheet, Plate, Tube, Bar | ||
20.0 °C | 260.0 MPa | T89 | EN 573-3 | Wire |
Thermal
| Property | Temperature | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|---|
Coefficient of thermal expansion | -50 °C | 2.18e-05 1/K | T89 | EN 573-3, EN 1301 | Strip, Sheet, Plate, Tube, Bar |
20 °C | 2.18e-05 1/K | T89 | EN 573-3, EN 1301 | Strip, Sheet, Plate, Tube, Bar | |
20 °C | 2.3399999999999996e-05 1/K | T89 | EN 573-3, EN 1301 | Strip, Sheet, Plate, Tube, Bar | |
20 °C | 2.45e-05 1/K | T89 | EN 573-3, EN 1301 | Strip, Sheet, Plate, Tube, Bar | |
20 °C | 2.56e-05 1/K | T89 | EN 573-3, EN 1301 | Strip, Sheet, Plate, Tube, Bar | |
100 °C | 2.3399999999999996e-05 1/K | T89 | EN 573-3, EN 1301 | Strip, Sheet, Plate, Tube, Bar | |
200 °C | 2.45e-05 1/K | T89 | EN 573-3, EN 1301 | Strip, Sheet, Plate, Tube, Bar | |
300 °C | 2.56e-05 1/K | T89 | EN 573-3, EN 1301 | Strip, Sheet, Plate, Tube, Bar | |
Melting point | 585.0 - 650.0 °C | T89 | EN 573-3, EN 1301 | Strip, Sheet, Plate, Tube, Bar | |
Specific heat capacity | 898.0 J/(kg·K) | T89 | EN 573-3, EN 1301 | Strip, Sheet, Plate, Tube, Bar | |
Thermal conductivity | 200.0 - 220.0 W/(m·K) | T89 | EN 573-3, EN 1301 | Strip, Sheet, Plate, Tube, Bar | |
20.0 °C | 220.0 W/(m·K) | T89 | EN 573-3 | Wire |
Electrical
| Property | Temperature | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|---|
Electrical conductivity | 28000000.0 - 31000000.0 S/m | T89 | EN 573-3, EN 1301 | Strip, Sheet, Plate, Tube, Bar | |
20.0 °C | 30000000.0 - 32000000.0 S/m | T89 | EN 573-3 | Wire | |
Electrical resistivity | 3.23e-08 - 3.57e-08 Ω·m | T89 | EN 573-3, EN 1301 | Strip, Sheet, Plate, Tube, Bar |
Chemical properties
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Chromium | 0.05 % | T89 | EN 573-3, EN 1301 | Wire, Strip, Sheet, Plate, Tube, Bar |
Copper | 0.1 % | T89 | EN 573-3, EN 1301 | Wire, Strip, Sheet, Plate, Tube, Bar |
Iron | 0.1 - 0.3 % | T89 | EN 573-3, EN 1301 | Wire, Strip, Sheet, Plate, Tube, Bar |
Magnesium | 0.35 - 0.6 % | T89 | EN 573-3, EN 1301 | Wire, Strip, Sheet, Plate, Tube, Bar |
Manganese | 0.1 % | T89 | EN 573-3, EN 1301 | Wire, Strip, Sheet, Plate, Tube, Bar |
Silicon | 0.3 - 0.6 % | T89 | EN 573-3, EN 1301 | Wire, Strip, Sheet, Plate, Tube, Bar |
Titanium | 0.1 % | T89 | EN 573-3, EN 1301 | Wire, Strip, Sheet, Plate, Tube, Bar |
Zinc | 0.15 % | T89 | EN 573-3, EN 1301 | Wire, Strip, Sheet, Plate, Tube, Bar |
Technological properties
| Property | ||
|---|---|---|
| Anodizing | decorative: EQ: sehr gut, Protective: very good | |
| Brazing | hard brazing (with flux/ without flux): very good / good, friction soldering: very good, soft brazing with flux: good | |
| Corrosion properties | Seawater: good, weathering: very good | |
| Workability | Bending / Spinning (cold): acceptable (T3, T4) / -, Impact extrusion (cold): good (O), Deep drawing / upsetting (Condition) - / good (O) | |
Metal
- AW-8014 O – Food-Safe, High-Performance Aluminum Alloy (EN 573-3)
- AW-8111 O Aluminium Alloy – EN 573‑3 Grade, Food Safe & High Strength
- EN 573-3 Grade AW-6060 T39 – Food‑Safe, Age‑Hardening AlMgSi Alloy with Versatile Form Options
- EN 573-3 AW-6082 T89 Aluminum Alloy – Food‑Safe, Age‑Hardenable, High Strength
- AW-6060 H14 Aluminum Alloy – EN 573-3 Certified, Food Safe, Age-Hardenable
- EN 573-3 Grade AW-6060 H19 – Food‑Safe Age‑Hardenable AlMgSi Alloy
- AW-6060 H18: Food‑Safe, Age‑Hardenable AlMgSi Alloy for High‑Performance Applications
- AW-6060 T4 Aluminum Alloy – EN 573-3 Certified Grade for High-Performance Applications
- AW-6060 T64: High-Performance, Food-Safe Aluminum Alloy (EN 573-3 Grade)
- EN 573-3 AW-6060 T66: Food‑Safe, Age‑Hardenable AlMgSi Alloy