AW-5449 H22 Aluminum Alloy – EN 573-3 Certified Grade
The alloy is not food safe.
Properties
General
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Density | 2.7 g/cm³ | H22 | EN 573-3, EN 485 | Strip, Sheet, Plate |
Mechanical
| Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|---|
Elastic modulus | 69.0 - 70.0 GPa | Typical for Wrought 5000 Series Aluminium | ||||
Plane-Strain Fracture Toughnes | 22.0 - 35.0 MPa·√m | Typical for Wrought 5000 Series Aluminium | ||||
Poisson's ratio | 0.33 [-] | Typical for Wrought 5000 Series Aluminium | ||||
Shear modulus | 26.0 - 26.5 GPa | Typical for Wrought 5000 Series Aluminium | ||||
Tensile strength | 20.0 °C | 220.0 - 270.0 MPa | H22 | EN 573-3 | Flat | Transverse |
20.0 °C | 220.0 - 270.0 MPa | H22 | EN 573-3, EN 485 | Strip, Sheet, Plate, Flat |
Thermal
| Property | Value | Comment |
|---|---|---|
Coefficient of thermal expansion | 2.2e-05 - 2.5e-05 1/K | Typical for Wrought 5000 Series Aluminium |
Max service temperature | 150.0 °C | Typical for Wrought 5000 Series Aluminium |
Melting point | 560.0 - 655.0 °C | Typical for Wrought 5000 Series Aluminium |
Specific heat capacity | 879.0 - 963.0 J/(kg·K) | Typical for Wrought 5000 Series Aluminium |
Thermal conductivity | 112.0 - 205.0 W/(m·K) | Typical for Wrought 5000 Series Aluminium |
Electrical
| Property | Value | Comment |
|---|---|---|
Electrical conductivity | 18000000.0 - 31000000.0 S/m | Typical for Wrought 5000 Series Aluminium |
Electrical resistivity | 3.3e-08 - 5e-08 Ω·m | Typical for Wrought 5000 Series Aluminium |
Chemical properties
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Chromium | 0.3 % | H22 | EN 573-3, EN 485 | Flat, Strip, Sheet, Plate |
Copper | 0.3 % | H22 | EN 573-3, EN 485 | Flat, Strip, Sheet, Plate |
Iron | 0.7 % | H22 | EN 573-3 | Flat |
0.70 % | H22 | EN 573-3, EN 485 | Strip, Sheet, Plate | |
Magnesium | 1.6 - 2.6 % | H22 | EN 573-3, EN 485 | Flat, Strip, Sheet, Plate |
Manganese | 0.6 - 1.1 % | H22 | EN 573-3, EN 485 | Flat, Strip, Sheet, Plate |
Silicon | 0.4 % | H22 | EN 573-3, EN 485 | Flat, Strip, Sheet, Plate |
Titanium | 0.1 % | H22 | EN 573-3, EN 485 | Flat, Strip, Sheet, Plate |
Zinc | 0.3 % | H22 | EN 573-3, EN 485 | Flat, Strip, Sheet, Plate |
Technological properties
| Property | ||
|---|---|---|
| Workability | Good workability. | |
Metal
- EN 573-3 Grade 3.0515 O3 – Key Mechanical & Thermal Properties
- AW-8008 H22: Food‑Safe, High‑Strength AlFeMn Alloy (EN 573-3)
- AW-2007 O Aluminium Alloy – EN 573-3 Grade Overview
- EN 573-3 Grade AW-5050A H22 – Food‑Safe Aluminium Alloy for Sheet, Strip & Plate Applications
- AW‑5040 H22 Aluminium Alloy – EN 573‑3 Certified, Food‑Safe & High Strength
- EN 573-3 AW-5449 (H111) Aluminium Alloy – Properties & Standards
- AW-5449 H24 Aluminum Alloy – EN 573-3 Certified Grade
- AW-5449 H26 – EN 573-3 Grade 5000 Series Aluminium Alloy
- AW-5449 H28 Aluminium – EN 573-3 Certified Grade
- AW-5449 O Aluminium Alloy – EN 573-3 Specification & Properties