AW-6005A T4 Aluminum Alloy – EN 573-3 Grade, Food Safe & High Strength
Age-hardenable AlMgSi alloy. The alloy is food safe.
Properties
General
| Property | Temperature | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|---|
Density | 2.7 g/cm³ | T4 | EN 573-3, EN 13195, EN 755 | Strip, Sheet, Plate, Tube, Bar | |
20.0 °C | 2.7 g/cm³ | T4 | EN 573-3 | Profile |
Mechanical
| Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|---|
Elastic modulus | 69.5 GPa | T4 | EN 573-3, EN 13195, EN 755 | Strip, Sheet, Plate, Tube, Bar | ||
20.0 °C | 73.0 GPa | T4 | EN 573-3 | Profile | ||
Elongation | 13.0 % | T4 | EN 573-3, EN 755 | Strip, Sheet, Plate, Tube, Bar | A50 | |
15.0 % | T4 | EN 573-3, EN 755 | Strip, Sheet, Plate, Tube, Bar | A100 | ||
20.0 °C | 13.0 % | T4 | EN 573-3 | Profile | A50 | |
20.0 °C | 15.0 % | T4 | EN 573-3 | Profile | ||
Hardness, Brinell | 20.0 °C | 50.0 [-] | T4 | EN 573-3 | Profile | |
Plane-Strain Fracture Toughnes | 22.0 - 35.0 MPa·√m | Typical for Wrought 6000 Series Aluminium | ||||
Poisson's ratio | 0.33 [-] | Typical for Wrought 6000 Series Aluminium | ||||
Shear modulus | 26.2 GPa | T4 | EN 573-3, EN 13195, EN 755 | Strip, Sheet, Plate, Tube, Bar | ||
20.0 °C | 27.0 GPa | T4 | EN 573-3 | Profile | ||
Tensile strength | 180.0 MPa | T4 | EN 573-3, EN 755 | Strip, Sheet, Plate, Tube, Bar | ||
20.0 °C | 180.0 MPa | T4 | EN 573-3 | Profile |
Thermal
| Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|---|
Coefficient of thermal expansion | 20 °C | 2.3399999999999996e-05 1/K | T4 | EN 573-3, EN 13195, EN 755 | Strip, Sheet, Plate, Tube, Bar | |
100 °C | 2.3399999999999996e-05 1/K | T4 | EN 573-3, EN 13195, EN 755 | Strip, Sheet, Plate, Tube, Bar | ||
Melting point | 585.0 - 650.0 °C | T4 | EN 573-3, EN 13195, EN 755 | Strip, Sheet, Plate, Tube, Bar | ||
Specific heat capacity | 887.0 - 963.0 J/(kg·K) | Typical for Wrought 6000 Series Aluminium | ||||
Thermal conductivity | 180.0 - 220.0 W/(m·K) | T4 | EN 573-3, EN 13195, EN 755 | Strip, Sheet, Plate, Tube, Bar | ||
20.0 °C | 170.0 - 220.0 W/(m·K) | T4 | EN 573-3 | Profile |
Electrical
| Property | Temperature | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|---|
Electrical conductivity | 26000000.0 - 32000000.0 S/m | T4 | EN 573-3, EN 13195, EN 755 | Strip, Sheet, Plate, Tube, Bar | |
20.0 °C | 24000000.0 - 32000000.0 S/m | T4 | EN 573-3 | Profile | |
Electrical resistivity | 3.13e-08 - 3.85e-08 Ω·m | T4 | EN 573-3, EN 13195, EN 755 | Strip, Sheet, Plate, Tube, Bar |
Chemical properties
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Chromium | 0.3 % | T4 | EN 573-3, EN 13195, EN 755 | Profile, Strip, Sheet, Plate, Tube, Bar |
Copper | 0.3 % | T4 | EN 573-3, EN 13195, EN 755 | Profile, Strip, Sheet, Plate, Tube, Bar |
Iron | 0.35 % | T4 | EN 573-3 | Profile |
0.35 % | T4 | EN 573-3, EN 13195, EN 755 | Strip, Sheet, Plate, Tube, Bar | |
Magnesium | 0.4 - 0.7 % | T4 | EN 573-3, EN 13195, EN 755 | Profile, Strip, Sheet, Plate, Tube, Bar |
Manganese | 0.5 % | T4 | EN 573-3, EN 13195, EN 755 | Profile, Strip, Sheet, Plate, Tube, Bar |
Silicon | 0.5 - 0.9 % | T4 | EN 573-3, EN 13195, EN 755 | Profile, Strip, Sheet, Plate, Tube, Bar |
Titanium | 0.1 % | T4 | EN 573-3, EN 13195, EN 755 | Profile, Strip, Sheet, Plate, Tube, Bar |
Zinc | 0.2 % | T4 | EN 573-3, EN 13195, EN 755 | Profile, Strip, Sheet, Plate, Tube, Bar |
Technological properties
| Property | ||
|---|---|---|
| Anodizing | decorative: good, Protective: very good | |
| Brazing | hard brazing (with flux/ without flux): poor / - | |
| Corrosion properties | Seawater: good, weathering: very good | |
| Workability | Bending / Spinning (cold): acceptable / - | |
Metal
- EN 573-3 Grade 3.0505 F Aluminium Alloy: Properties & Standards
- EN 573-3 Grade 3.1305 F Aluminium Alloy – Key Mechanical Properties
- EN 573-3 Grade 3.1305 O Aluminium: Key Mechanical Properties & Standards
- EN 573-3 Grade 3.1305 O3 – Comprehensive Aluminium Alloy Specifications
- EN 573-3 Grade 3.3316 F – Key Properties & Standards for 5000 Series Aluminium
- EN 573-3 Grade 3.3549 F – Premium Aluminum Alloy with Expert R&D Support
- EN 573-3 AW‑1090 F Aluminium: Technical Specifications & Standards
- AW-5356 F Aluminum Alloy – EN 573‑3 Specification & Key Mechanical Properties
- EN 573-3 Grade AW-5356 O3 Aluminium Alloy – Key Properties & Standards
- EN 573-3 AW-6005A Grade: Aluminium Alloy Specifications & Standards