AW-5050 H24 Aluminum Alloy – EN 573-3 Certified, Food‑Safe & Naturally Hard
Naturally hard AlMg alloy. The alloy is food safe.
Properties
General
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Density | 2.68 g/cm³ | H24 | EN 573-3, EN 485 | Strip, Sheet, Plate |
2.69 g/cm³ | H24 | EN 573-3, EN 485 | Strip, Sheet, Plate |
Mechanical
| Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|---|
Bending angle 180° | 1.5 °/t | H24 | EN 573-3, EN 485 | Strip, Sheet, Plate | ||
2.0 °/t | H24 | EN 573-3, EN 485 | Strip, Sheet, Plate | |||
Bending angle 90° | 0.5 °/t | H24 | EN 573-3, EN 485 | Strip, Sheet, Plate | ||
1.0 °/t | H24 | EN 573-3, EN 485 | Strip, Sheet, Plate | |||
1.5 °/t | H24 | EN 573-3, EN 485 | Strip, Sheet, Plate | |||
2.0 °/t | H24 | EN 573-3, EN 485 | Strip, Sheet, Plate | |||
Elastic modulus | 69.0 GPa | H24 | EN 573-3, EN 485 | Strip, Sheet, Plate | ||
70.0 GPa | H24 | EN 573-3, EN 485 | Strip, Sheet, Plate | |||
Hardness, Brinell | 54.0 [-] | H24 | EN 573-3, EN 485 | Strip, Sheet, Plate | ||
20.0 °C | 54.0 [-] | H24 | EN 573-3 | Flat | ||
Plane-Strain Fracture Toughnes | 22.0 - 35.0 MPa·√m | Typical for Wrought 5000 Series Aluminium | ||||
Poisson's ratio | 0.33 [-] | Typical for Wrought 5000 Series Aluminium | ||||
Shear modulus | 26.0 - 26.5 GPa | Typical for Wrought 5000 Series Aluminium | ||||
Tensile strength | 20.0 °C | 175.0 - 215.0 MPa | H24 | EN 573-3 | Flat | Transverse |
20.0 °C | 175.0 - 215.0 MPa | H24 | EN 573-3, EN 485 | Strip, Sheet, Plate, Flat |
Thermal
| Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|---|
Coefficient of thermal expansion | 20 °C | 2.38e-05 1/K | H24 | EN 573-3, EN 485 | Strip, Sheet, Plate | |
100 °C | 2.38e-05 1/K | H24 | EN 573-3, EN 485 | Strip, Sheet, Plate | ||
Max service temperature | 150.0 °C | Typical for Wrought 5000 Series Aluminium | ||||
Melting point | 620.0 - 650.0 °C | H24 | EN 573-3, EN 485 | Strip, Sheet, Plate | ||
625.0 - 650.0 °C | H24 | EN 573-3, EN 485 | Strip, Sheet, Plate | |||
Specific heat capacity | 879.0 - 963.0 J/(kg·K) | Typical for Wrought 5000 Series Aluminium | ||||
Thermal conductivity | 170.0 - 190.0 W/(m·K) | H24 | EN 573-3, EN 485 | Strip, Sheet, Plate | ||
193 W/(m·K) | H24 | EN 573-3, EN 485 | Strip, Sheet, Plate |
Electrical
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Electrical conductivity | 23000000.0 - 26000000.0 S/m | H24 | EN 573-3, EN 485 | Strip, Sheet, Plate |
29000000.0 S/m | H24 | EN 573-3, EN 485 | Strip, Sheet, Plate | |
Electrical resistivity | 3.45e-08 Ω·m | H24 | EN 573-3, EN 485 | Strip, Sheet, Plate |
3.85e-08 - 4.35e-08 Ω·m | H24 | EN 573-3, EN 485 | Strip, Sheet, Plate |
Chemical properties
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Chromium | 0.1 % | H24 | EN 573-3, EN 485 | Flat, Strip, Sheet, Plate |
Copper | 0.2 % | H24 | EN 573-3, EN 485 | Flat, Strip, Sheet, Plate |
Iron | 0.7 % | H24 | EN 573-3 | Flat |
0.70 % | H24 | EN 573-3, EN 485 | Strip, Sheet, Plate | |
Magnesium | 1.1 - 1.8 % | H24 | EN 573-3, EN 485 | Flat, Strip, Sheet, Plate |
Manganese | 0.1 % | H24 | EN 573-3, EN 485 | Flat, Strip, Sheet, Plate |
0.3 % | H24 | EN 573-3 | Flat | |
Silicon | 0.4 % | H24 | EN 573-3, EN 485 | Flat, Strip, Sheet, Plate |
Zinc | 0.25 % | H24 | EN 573-3, EN 485 | Flat, Strip, Sheet, Plate |
Technological properties
| Property | ||
|---|---|---|
| Workability | Good workability. | |
Metal
- EN 573-3 Grade AW-1350 H24 – Premium Wrought Aluminium for Structural Applications
- EN 573-3 Grade 3.0257 H24 – Comprehensive Material Properties & Standards
- AW‑5050F Aluminum Alloy – EN 573‑3 Certified, Food‑Safe, High‑Performance
- EN 573-3 Grade 3.3555 H24 – High-Strength Aluminium Alloy Specifications
- EN 573-3 Grade 3.0285 H24 Steel – Key Mechanical Properties & Standards
- EN 573-3 Grade 3.0275 H24 – Premium Aluminium Alloy with Superior Mechanical Properties
- EN 573-3 AW-1100 H24 Aluminum Alloy – Purest Grade with Superior Corrosion Resistance
- AW-5050 H44 Aluminum‑Magnesium Alloy – Food‑Safe, EN 573‑3 Certified
- AW-5050 H46 AlMg Alloy – EN 573-3 Certified, Food‑Safe Grade
- AW-5050 H48 Grade AlMg Alloy – Food‑Safe, High‑Strength, EN 573‑3 Certified