Osai SSL Command: Set Spindle Speed Limits with G96
Osai 10 Series command SSL is used with G96 to set the maximum rpm that the spindle is allowed to run during CSS.
Programming
SSL=value
Parameters
| Parameter | Description |
|---|---|
| value | Is a value that can be programmed directly with a decimal number or indirectly with an E parameter. |
Examples
SSL = 2000 ;Assign a spindle speed limit of 2000 rpm E32 = 1500 SSL = E32 ;Assign a spindle speed limit of 1500 rpm
Important
Make sure you enter this value in the part program prior to entering G96 blocks.
Osai UGS (UCG) Command: Configure Graphic Scale for Machine Plot & 3D Graphics
ECS G89 Boring Cycle with Dwell Time: Step‑by‑Step Guide
CNC Machine
- Understanding Cutting Speed, Feed Rate, and Depth of Cut in Machining
- High‑Speed Machining: Unlocking Precision and Speed Through Advanced Machine Design
- Choosing the Right High‑Speed Electric Spindle Motor: Key Principles
- Tsugami P01 Lathe – 25,000 RPM Spindles, 3 mm Bar Capacity, Precision Micro‑Part Machining
- Doosan Lynx 220 Turning Centers: Speed, Power, and Precision
- Complete List of Osai 10 Series CNC M Codes for Programmers
- Osai DIS: Displaying Variable Values to Operators
- Disable Graphic Display with Osai DGS (DCG) Command
- Osai CGS (CLG) – Clear Graphic Screen Command: Preserve Coordinates
- Osai UGS (UCG) Command: Configure Graphic Scale for Machine Plot & 3D Graphics