RM130 Epoxy Rods: High-Performance Flame Retardant Glass Fabric with Superior Electrical & Physical Properties

Rolled and Molded Rods made from a glass fabric with a flame retardant resin system. RM130 combines excellent electrical characteristics with superior physical properties at normal operating temperatures. Electrical properties maintained in high humidity conditions. RM130 meets NEMA FR-4, but with elevated temperature performance.

Properties

General

Property	Value	Testing Standard	Comment
Density	1.84 g/cm³	ASTM D349
Moisture absorption	0.03 %	ASTM D349	Condition D₁-24/23

Mechanical

Property	Value	Testing Standard	Comment
Compressive strength	363 MPa	ASTM D349	Condition A
Flexural strength	450 MPa	ASTM D349	Condition A
Hardness, Rockwell M	105 [-]	ASTM D349
Tensile strength	284 MPa	ASTM D349	Condition A

Thermal

Property	Value	Comment
Relative temperature index, electrical	120 °C	¹
Relative temperature index, mechanical strength	130 °C	¹
Flammability	UL 94, Class V-0

Technological properties

Property
Fillers	Glass Fabric
Other	1.This temperature is a recommendation only, and based upon experience in various applications. The maximum operating temperature is dependent upon the application and should be investigated prior to use.
Supplier Disclaimer	This data, while believed to be accurate and based on reliable analytical methods, is for informational purposes only. The terms and conditions of the agreement under which it is sold will govern any sales of this product. Data supplied above are "typical values"; not to be considered "specification values". To assure the material's performance is adequate for a specific application; customers should verify, independent of Norplex-Micarta, performance characteristics of interest. It is the responsibility of the users of this information to make sure that they have the latest version of this TDB, and are urged to check with Customer Service or, preferably our web site, www.norplex-micarta.com, to determine if the information is the most current available.

Property

Fillers

Glass Fabric

Other

1.This temperature is a recommendation only, and based upon experience in various applications. The maximum operating temperature is dependent upon the application and should be investigated prior to use.

Supplier Disclaimer

This data, while believed to be accurate and based on reliable analytical methods, is for informational purposes only. The terms and conditions of the agreement under which it is sold will govern any sales of this product. Data supplied above are "typical values"; not to be considered "specification values".

To assure the material's performance is adequate for a specific application; customers should verify, independent of Norplex-Micarta, performance characteristics of interest.

It is the responsibility of the users of this information to make sure that they have the latest version of this TDB, and are urged to check with Customer Service or, preferably our web site, www.norplex-micarta.com, to determine if the information is the most current available.

NP193PM Phenolic Composite Sheet – Superior Strength & Heat Resistance RM504 Phenolic Rod – High-Performance Fiber‑Glass Composite for Mechanical & Low‑Voltage Electrical Applications

Composite material