RT504F Phenolic Composite Tube – Superior Heat & Chemical Resistance
Grade RT504F is composed of a fine weave glass fabric combined with a phenolic resin system. It has excellent heat and chemical resistance in basic systems. It has good physical strength and high impact resistance. The use of a fine weave fabric is to provide better finish to the final part.
Properties
General
| Property | Value | Testing Standard | Comment |
|---|---|---|---|
Density | 1.78 g/cm³ | ASTM D792 | |
Moisture absorption | 0.2 % | ASTM D570 | Condition D₁-24/23 |
Mechanical
| Property | Value | Testing Standard | Comment |
|---|---|---|---|
Compressive modulus | 7.7 GPa | ||
Compressive strength | 296.5 MPa | ASTM D695 | Condition A |
Hardness, Rockwell M | 120 [-] | ASTM D785 | |
Tensile strength | 310.3 MPa | ASTM D638 | Condition A |
Thermal
| Property | Value | Comment | |
|---|---|---|---|
Relative temperature index, electrical | 180 °C | ¹ | |
Relative temperature index, mechanical strength | 160 °C | ¹ | |
Flammability | UL Bulletin 94, Class HB | ||
Electrical
| Property | Value | Testing Standard | Comment |
|---|---|---|---|
Dielectric strength | 15.74 kV/mm | ASTM D149 | Condition D-48/50 |
16.53 kV/mm | ASTM D149 | Condition A |
Technological properties
| Property | ||
|---|---|---|
| Application areas | Typical applications include structural parts and can be substituted for G-7 in certain applications. | |
| Fillers | Glass Fabric | |
| Other | 1.This temperature is a recommendation only, and based upon experience in various applications. The maximum operating temperature is dependent upon the application and should be investigated prior to use 2.The mechanical properties are converted from American unit system to International unit system. | |
| Supplier Disclaimer | This data, while believed to be accurate and based on reliable analytical methods, is for informational purposes only. The terms and conditions of the agreement under which it is sold will govern any sales of this product. Data supplied above are "typical values"; not to be considered "specification values". To assure the material's performance is adequate for a specific application; customers should verify, independent of Norplex-Micarta, performance characteristics of interest. It is the responsibility of the users of this information to make sure that they have the latest version of this TDB, and are urged to check with Customer Service or, preferably our web site, www.norplex-micarta.com, to determine if the information is the most current available. | |
Composite material
- RT370 Phenolic Composite Tube – Superior Strength & Durability
- BT45NPM Phenolic Tube – High-Strength Hybrid Aramid Material
- RT193PM Phenolic Tube – Advanced Aramid‑Resin Bearing Material
- RT342H Phenolic Tube – Advanced Heat‑Treated Fabric for Superior Machining
- BT12HPN Phenolic Tube – Heat‑Treated Canvas Material for Superior Machining and Cost Efficiency
- Phenolic BT22NPN Tube – Ultra-Fine Fiber-Free Fabric for High-Performance Machining
- High-Performance Phenolic BT22ZPN Tubes – Superior Density & Longevity
- Phenolic BT25HPN Tube – Heat‑Treated, Low Moisture, Superior Dimensional Stability
- Phenolic BT25NPN Tube – Low Moisture, High Dimensional Stability
- RT504F Phenolic Composite Tube – Superior Heat & Chemical Resistance