NP660 Phenolic Sheet – High-Performance, Cost-Effective NEMA Grade XP
Lower cost paper phenolic NEMA Grade XP. NP660 uses natural kraft paper without pigmented cover sheet. It is a warm to hot punching material. It is available in natural and black only, without a pigmented cover, only.
Properties
General
| Property | Value | Testing Standard | Comment |
|---|---|---|---|
Bonding strength | 499 Kg | ASTM D229 | Condition A |
Density | 1.35 g/cm³ | ASTM D792 | |
Moisture absorption | 3.5 % | ASTM D570 | Condition D₁-24/23 |
Mechanical
| Property | Value | Testing Standard | Comment |
|---|---|---|---|
Compressive strength | 337.8 MPa | ASTM D695 | Condition A | Flatwise |
Flexural modulus | 9.7 GPa | ASTM D790 | Condition A, Transverse |
13.1 GPa | ASTM D790 | Condition A | |
Flexural strength | 206.8 MPa | ASTM D790 | Condition A, Transverse |
227.5 MPa | ASTM D790 | Condition A | |
Hardness, Rockwell M | 100 [-] | ASTM D785 | |
Impact strength, Izod unnotched, ASTM | 37 J/m | ASTM D256 | Condition E-48/50, Transverse |
40 J/m | ASTM D256 | Condition E-48/50 | |
Shear strength | 96.5 MPa | ASTM D732 | Condition A, Transverse |
Tensile strength | 137.9 MPa | ASTM D638 | Condition A |
Thermal
| Property | Value | Testing Standard | Comment | ||
|---|---|---|---|---|---|
Coefficient of thermal expansion | 1.3e-05 1/K | IPC-TM 650-2.4.24 | |||
1.7e-05 1/K | IPC-TM 650-2.4.24 | Transverse | |||
Relative temperature index, electrical | 130 °C | UL Bulletin 746b¹ | |||
Relative temperature index, mechanical strength | 130 °C | UL Bulletin 746b¹ | |||
Arc resistance | 60 seconds, ASTM D495, Condition A | ||||
Flammability | UL Bulletin 94, Class HB, Condition A | ||||
Electrical
| Property | Value | Testing Standard | Frequency | Comment |
|---|---|---|---|---|
Breakdown voltage | 47 kV | ASTM D149 | Condition A | |
Comparative tracking index | 150 V | ASTM D3638 | ||
Dielectric constant | 5.45 [-] | ASTM D150 | 1MHz | Condition D-24/23 |
Dielectric strength | 11.81 kV/mm | ASTM D149 | Condition D-48/50 | |
19.69 kV/mm | ASTM D149 | Condition A | ||
Dissipation factor | 0.045 [-] | ASTM D150 | 1MHz | Condition D-24/23 |
Technological properties
| Property | ||
|---|---|---|
| Fillers | Paper | |
| Other | 1.This temperature is a recommendation only, and based upon experience in various applications. The maximum operating temperature is dependent upon the application and should be investigated prior to use | |
| Supplier Disclaimer | This data, while believed to be accurate and based on reliable analytical methods, is for informational purposes only. The terms and conditions of the agreement under which it is sold will govern any sales of this product. Data supplied above are "typical values"; not to be considered "specification values". To assure the material's performance is adequate for a specific application; customers should verify, independent of Norplex-Micarta, performance characteristics of interest. It is the responsibility of the users of this information to make sure that they have the latest version of this TDB, and are urged to check with Customer Service or, preferably our web site, www.norplex-micarta.com, to determine if the information is the most current available. | |
Composite material
- BP11MPN Phenolic Composite Sheet – Superior Medium‑Weave Cotton Performance
- MC223 Medium-Weave Cotton Phenolic Sheet – High Performance Composite
- NP313HT Phenolic Sheet – Durable, Semi-Conductive, Low-Wear Performance
- Phenolic BP15NPN Sheet – Durable Post-Forming Canvas
- NP504 Phenolic Sheet – 175°C Rated, Superior Flexural & Impact Strength
- Phenolic NP310E Sheet: Superior Strength & Low Moisture for Precision Applications
- NP342 Phenolic Sheet – Military‑Grade Performance & Cost‑Effective Machining
- MC320LE Phenolic Composite Sheet – Superior Strength & Low Moisture Absorption
- Phenolic NP615 Sheet – Flexible, High‑Resin, Arc‑Resistant Sheet Material
- NP612 Phenolic Sheet – Flexible, Durable Electrical Insulation