ASTM A182 Grade F6b – Annealed/Normalized & Tempered Martensitic Stainless Steel
Properties
General
| Property | Temperature | Value | Comment |
|---|---|---|---|
Density | 23.0 °C | 7.6 - 7.7 g/cm³ | Typical for Martensitic Stainless Steel |
Mechanical
| Property | Temperature | Value | Comment |
|---|---|---|---|
Elastic modulus | 23.0 °C | 220 GPa | Typical for Martensitic Stainless Steel |
Elongation A50 | 23.0 °C | 16 % | |
Hardness, Brinell | 23.0 °C | 235 - 285 [-] | |
Poisson's ratio | 23.0 °C | 0.3 [-] | Typical for Martensitic Stainless Steel |
Reduction of area | 23.0 °C | 45 % | |
Shear modulus | 23.0 °C | 77 GPa | Typical for Martensitic Stainless Steel |
Tensile strength | 23.0 °C | 760 - 930 MPa | |
Yield strength Rp0.2 | 23.0 °C | 620 MPa |
Thermal
| Property | Temperature | Value | Comment |
|---|---|---|---|
Coefficient of thermal expansion | 23.0 °C | 1E-5 - 1.5E-5 1/K | Typical for Martensitic Stainless Steel |
Melting point | 1370 - 1530 °C | Typical for Martensitic Stainless Steel | |
Specific heat capacity | 23.0 °C | 460 J/(kg·K) | Typical for Martensitic Stainless Steel |
Thermal conductivity | 23.0 °C | 14 - 31 W/(m·K) | Typical for Martensitic Stainless Steel |
Electrical
| Property | Temperature | Value | Comment |
|---|---|---|---|
Electrical resistivity | 23.0 °C | 6E-7 Ω·m | Typical for Martensitic Stainless Steel |
Chemical properties
| Property | Value |
|---|---|
Carbon | 0.15 % |
Chromium | 11.5 - 13.5 % |
Manganese | 1 % |
Molybdenum | 0.4 - 0.6 % |
Nickel | 1 - 2 % |
Phosphorus | 0.02 % |
Silicon | 1 % |
Sulfur | 0.02 % |
Metal
- ASTM A182 Grade F115 – Normalized & Tempered Austenitic Stainless Steel
- ASTM A182 Grade F91 Type 1 – Normalized & Tempered or Quenched & Tempered Steel
- ASTM A182 Grade F6NM – High-Strength Normalized & Tempered Stainless Steel
- ASTM A420 Grade WPL6 Steel: Normalized, Tempered, Annealed or Quenched & Tempered – Specifications & Properties
- ASTM A148 Grade 1140‑1035 Steel – Properties & Heat Treatment Options
- ASTM A148 Grade 1140‑1035L Low‑Carbon Steel: Properties for Annealed, Normalized, Tempered, and Quenched Treatments
- ASTM A148 Grade 1450–1240 Steel: Properties & Heat Treatment Options
- ASTM A148 Grade 1450-1240L Steel – Annealed, Normalized, Tempered or Quenched & Tempered
- ASTM A216 Grade WCA Steel – Annealed, Normalized, or Normalized & Tempered Specifications
- ASTM A216 Grade WCC: Annealed, Normalized, or Normalized & Tempered Steel – Key Properties & Specifications