EN 12167 Grade CuZr H120 – High-Performance Hardenable Copper Alloy
CuZr, mat. No CW120C, is counted among hardenable, low alloyed copper alloys. To the comparable make CuZr, mat. No 2.1580, acc. to DIN 17666 : 1983-12 applies: The strength properties of CuZr are not as favorable as for CuCrZr but it very well meets high requirements to tempering strength and creep strength at preferably high electric conductivity.Temperature for removal of workhardening approximates 525°C. Processing properties: hot and cold forming: good machinability: moderately soft soldering: moderately hard soldering: moderately gas shielded welding: moderately burnishing: good Application: For commutator lamellae of high strains, rotor windings in high loaded electric motors, diode bases, resistance welding electrodes as well as for electronic calculators.
Properties
General
| Property | Temperature | Value |
|---|---|---|
Density | 20.0 °C | 8.9 g/cm³ |
Mechanical
| Property | Temperature | Value | Comment |
|---|---|---|---|
Elastic modulus | 20.0 °C | 135 GPa | |
Hardness, Brinell | 20.0 °C | 120 - 160 [-] | |
Poisson's ratio | 23.0 °C | 0.34 [-] | Typical for Wrought Copper Pure / Low Alloyed Copper |
Shear modulus | 23.0 °C | 48 GPa | Typical for Wrought Copper Pure / Low Alloyed Copper |
Thermal
| Property | Temperature | Value | Comment |
|---|---|---|---|
Coefficient of thermal expansion | 300.0 °C | 1.7E-5 - 1.8E-5 1/K | |
Melting point | 965 - 1100 °C | Typical for Wrought Copper Pure / Low Alloyed Copper | |
Specific heat capacity | 23.0 °C | 377 - 420 J/(kg·K) | Typical for Wrought Copper Pure / Low Alloyed Copper |
Thermal conductivity | 20.0 °C | 167 - 330 W/(m·K) |
Electrical
| Property | Temperature | Value |
|---|---|---|
Electrical conductivity | 20.0 °C | 2.60E+7 - 5.40E+7 S/m |
Specific Electrical conductivity | 86 % IACS |
Chemical properties
| Property | Value |
|---|---|
Zirconium | 0.1 - 0.2 % |
Metal
- EN 12163 CuZr TH Grade – High Strength Low‑Alloy Copper Alloy
- EN 12167 Grade CuZr H090 – High-Performance Low-Alloy Copper Alloy
- EN 12167 Grade CuZr H075 – Premium Copper Alloy for High Conductivity & Creep Resistance
- EN 12163 Grade CuZr H090 – High Strength, High Conductivity Copper Alloy
- EN 12163 Grade H120 CuZr Copper Alloy – High Strength, Excellent Conductivity
- EN 12163 Grade H075 CuZr Alloy – High Strength & Conductivity
- EN 12167 Grade Cu-DHP H085: Premium Phosphoric-Grade Pure Copper
- EN 12166: Grade CuZr M – Premium Low‑Alloy Copper with Superior Strength and Conductivity
- EN 12167 Cu-DHP R280 – Premium Phosphoric Pure Copper for High‑Performance Applications
- EN 12167 Grade CuZr R350: High-Performance Low-Carbon Copper Alloy for Superior Strength and Conductivity