AMPCO® 26 – The Ultra‑Hard Aluminium Bronze for High‑Performance Castings

AMPCO® 25 is a patented alloy which displays outstanding mechanical properties. The extreme hardness, linked with an excellent compressive strength and very good friction properties, makes it ideal as a forming and drawing die material. As the elongation of the material is nil, thin sections should

AMPCO® 22 is a duplex structure alloy of approx. 50 % of each phase - gamma 2 and beta. It is remarkable because of its hardness, its excellent compression and wear resistance and by its sliding properties. As the elongation of the material is very low, thin sections should be avoided and the materi

2.1247 is a 2 % beryllium copper alloy which displays very high mechanical properties with a reasonably good electrical and thermal conductivity.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C8.26 g/cm³Recycled Content80 %MechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C126 GPa

The patented process gives AMPCO® M4 mechanical properties beyond the range of commercial nickel-aluminium bronzes, comparable to beryllium copper at a lower cost and without the beryllium copper industrial hygiene requirements.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C7.45 g/cm³Recycle