AA 201.0 T4 Alloy – Key Mechanical & Thermal Properties
Properties
General
| Property | Value | Condition |
|---|---|---|
Density | 3.1 g/cm³ | T4 |
Mechanical
| Property | Value | Condition | Comment |
|---|---|---|---|
Charpy impact energy, V-notch | 21.7 J | T4 | |
Elastic modulus | 71.0 GPa | T4 | |
71 GPa | T4 | ||
Elongation | 20.0 % | T4 | |
20 % | T4 | Sand cast, elongation in 50 mm | |
Hardness, Brinell | 95 [-] | T4 | 500 kg load, 10 mm b |
Poisson's ratio | 0.33 [-] | T4 | |
Shear modulus | 23.0 GPa | T4 | |
Tensile strength | 365 MPa | T4 | Sand cast |
370.0 MPa | T4 | ||
Yield strength | 215 MPa | T4 | Sand cast, RP02 |
220.0 MPa | T4 |
Thermal
| Property | Value | Condition |
|---|---|---|
Coefficient of thermal expansion | 2.1e-05 1/K | T4 |
Melting point | 570.0 °C | T4 |
Specific heat capacity | 920.0 J/(kg·K) | T4 |
Thermal conductivity | 120.0 W/(m·K) | T4 |
Electrical
| Property | Value | Comment |
|---|---|---|
Electrical conductivity | 16000000.0 - 23000000.0 S/m | Typical for Cast 2xx.x Series Aluminium |
Electrical resistivity | 4.347826086956522e-08 - 6.25e-08 Ω·m | Typical for Cast 2xx.x Series Aluminium |
Chemical properties
| Property | Value | Condition |
|---|---|---|
Aluminium | 92.1 - 95.1 % | T4 |
Copper | 4.0 - 5.2 % | T4 |
Iron | 0.15 % | T4 |
Magnesium | 0.15 - 0.55 % | T4 |
Manganese | 0.2 - 0.5 % | T4 |
Other | 0.1 % | T4 |
Silicon | 0.1 % | T4 |
Silver | 0.4 - 1.0 % | T4 |
Titanium | 0.15 - 0.35 % | T4 |
Metal
- WC-Ag Composite: High-Performance Electrical Contact Material
- AgCu20 Alloy: Comprehensive Mechanical & Thermal Properties at 23°C
- PtNi10 Alloy: Comprehensive Mechanical & Thermal Properties
- PtIr10 Platinum-Iridium Alloy: High-Strength, High-Temperature Material
- AA 1050 H18 Aluminium: Key Mechanical and Thermal Properties
- AA 1350 H22 Aluminium Alloy – Key Mechanical & Thermal Properties
- AA 1350 H242 Aluminium: Mechanical & Thermal Properties
- AA 1350 H142 Aluminium – Mechanical & Thermal Properties Overview
- AA 1350 H24 Aluminium Alloy: Mechanical & Thermal Properties
- Pink Sheets 201.0 T7: High-Performance Mechanical Properties