AA 1350 H24 Aluminium Alloy: Mechanical & Thermal Properties
Properties
General
| Property | Value | Condition |
|---|---|---|
Density | 2.7 g/cm³ | H24 |
Mechanical
| Property | Value | Condition | Comment |
|---|---|---|---|
Elastic modulus | 69.0 GPa | H24 | |
Plane-Strain Fracture Toughnes | 22.0 - 35.0 MPa·√m | Typical for Wrought 1000 Series Aluminium | |
Poisson's ratio | 0.33 [-] | Typical for Wrought 1000 Series Aluminium | |
Shear modulus | 25.9 GPa | Typical for Wrought 1000 Series Aluminium | |
Tensile strength | 100.0 MPa | H24 |
Thermal
| Property | Value | Condition |
|---|---|---|
Coefficient of thermal expansion | 2.4e-05 1/K | H24 |
Melting point | 650.0 °C | H24 |
Specific heat capacity | 900.0 J/(kg·K) | H24 |
Thermal conductivity | 230.0 W/(m·K) | H24 |
Electrical
| Property | Value | Comment |
|---|---|---|
Electrical conductivity | 33000000.0 - 38000000.0 S/m | Typical for Wrought 1000 Series Aluminium |
Electrical resistivity | 2.7e-08 - 3e-08 Ω·m | Typical for Wrought 1000 Series Aluminium |
Chemical properties
| Property | Value | Condition |
|---|---|---|
Aluminium | 99.5 - 100.0 % | H24 |
Boron | 0.05 % | H24 |
Chromium | 0.01 % | H24 |
Copper | 0.05 % | H24 |
Gallium | 0.03 % | H24 |
Iron | 0.4 % | H24 |
Manganese | 0.01 % | H24 |
Other | 0.1 % | H24 |
Silicon | 0.1 % | H24 |
Titanium | 0.02 % | H24 |
Vanadium | 0.02 % | H24 |
Zinc | 0.05 % | H24 |
Technological properties
| Property | ||
|---|---|---|
| Brazing | Excellent | |
| Workability | Excellent workability. | |
Metal
- AA 201.0 T4 Alloy – Key Mechanical & Thermal Properties
- AA 1350 H22 Aluminium Alloy – Key Mechanical & Thermal Properties
- AA 1350 H242 Aluminium: Mechanical & Thermal Properties
- AA 1350 H142 Aluminium – Mechanical & Thermal Properties Overview
- AA 1350 H26 Aluminium Alloy – Key Properties & Performance Data
- AW-8008 H24 – Food‑Safe AlFeMn Alloy (EN 573-3 Grade)
- EN 573-3 Grade AW-5050A H24 – Food‑Safe Aluminium Sheet & Plate with High Toughness
- AW-5042 H24: Food‑Safe, EN 573‑3 Certified Al‑Mg Alloy with High Toughness
- AW-5449 H24 Aluminum Alloy – EN 573-3 Certified Grade
- AW-5026 H24 Aluminium Alloy – EN 573-3 Grade, Food‑Safe & High‑Performance