AW-5026 H24 Aluminium Alloy – EN 573-3 Grade, Food‑Safe & High‑Performance
Naturally hard AlMg alloy. The alloy is food safe.
Properties
General
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Density | 2.69 g/cm³ | H24 | EN 573-3, EN 485 | Strip, Sheet, Plate |
Mechanical
| Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|---|
Elastic modulus | 69.0 - 70.0 GPa | Typical for Wrought 5000 Series Aluminium | ||||
Elongation | 4.0 % | H24 | EN 573-3, EN 485 | Strip, Sheet, Plate | A100 | |
5.0 % | H24 | EN 573-3, EN 485 | Strip, Sheet, Plate | A50 | ||
20.0 °C | 4.0 % | H24 | EN 573-3 | Flat | Transverse | |
20.0 °C | 4.0 % | H24 | EN 573-3 | Flat | ||
20.0 °C | 5.0 % | H24 | EN 573-3 | Flat | A50 Transverse | |
20.0 °C | 5.0 % | H24 | EN 573-3 | Flat | A50 | |
Plane-Strain Fracture Toughnes | 22.0 - 35.0 MPa·√m | Typical for Wrought 5000 Series Aluminium | ||||
Poisson's ratio | 0.33 [-] | Typical for Wrought 5000 Series Aluminium | ||||
Shear modulus | 26.0 - 26.5 GPa | Typical for Wrought 5000 Series Aluminium | ||||
Tensile strength | 20.0 °C | 300.0 - 340.0 MPa | H24 | EN 573-3 | Flat | Transverse |
20.0 °C | 300.0 - 340.0 MPa | H24 | EN 573-3, EN 485 | Strip, Sheet, Plate, Flat |
Thermal
| Property | Value | Comment |
|---|---|---|
Coefficient of thermal expansion | 2.2e-05 - 2.5e-05 1/K | Typical for Wrought 5000 Series Aluminium |
Max service temperature | 150.0 °C | Typical for Wrought 5000 Series Aluminium |
Melting point | 560.0 - 655.0 °C | Typical for Wrought 5000 Series Aluminium |
Specific heat capacity | 879.0 - 963.0 J/(kg·K) | Typical for Wrought 5000 Series Aluminium |
Thermal conductivity | 112.0 - 205.0 W/(m·K) | Typical for Wrought 5000 Series Aluminium |
Electrical
| Property | Value | Comment |
|---|---|---|
Electrical conductivity | 18000000.0 - 31000000.0 S/m | Typical for Wrought 5000 Series Aluminium |
Electrical resistivity | 3.3e-08 - 5e-08 Ω·m | Typical for Wrought 5000 Series Aluminium |
Chemical properties
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Chromium | 0.3 % | H24 | EN 573-3, EN 485 | Flat, Strip, Sheet, Plate |
Copper | 0.1 - 0.8 % | H24 | EN 573-3, EN 485 | Flat, Strip, Sheet, Plate |
Iron | 0.2 - 1.0 % | H24 | EN 573-3, EN 485 | Flat, Strip, Sheet, Plate |
Magnesium | 3.9 - 4.9 % | H24 | EN 573-3, EN 485 | Flat, Strip, Sheet, Plate |
Manganese | 0.6 - 1.8 % | H24 | EN 573-3, EN 485 | Flat, Strip, Sheet, Plate |
Silicon | 0.55 - 1.4 % | H24 | EN 573-3, EN 485 | Flat, Strip, Sheet, Plate |
Titanium | 0.2 % | H24 | EN 573-3, EN 485 | Flat, Strip, Sheet, Plate |
Zinc | 1.0 % | H24 | EN 573-3, EN 485 | Flat, Strip, Sheet, Plate |
Zirconium | 0.3 % | H24 | EN 573-3, EN 485 | Flat, Strip, Sheet, Plate |
Technological properties
| Property | ||
|---|---|---|
| Workability | Good workability. | |
Metal
- AW-8008 H24 – Food‑Safe AlFeMn Alloy (EN 573-3 Grade)
- EN 573-3 AW-8008 O – Food‑Safe, High‑Strength AlFeMn Alloy
- AW-4007 F Aluminum Alloy – EN 573-3 Certified, Food-Safe, High-Strength
- AW‑6951 O (EN 573‑3): Food‑Safe Age‑Hardenable AlMgSi Alloy
- EN 573-3 Grade AW-5050A H24 – Food‑Safe Aluminium Sheet & Plate with High Toughness
- AW-5040 O: Certified Food‑Safe Aluminium Alloy (EN 573‑3)
- AW-5042 H24: Food‑Safe, EN 573‑3 Certified Al‑Mg Alloy with High Toughness
- AW-5026 H34 Aluminium Alloy – EN 573‑3 Grade, Food‑Safe, High Strength
- AW‑5026 O – Food‑Safe, EN 573‑3 Grade AlMg Alloy with High Strength
- AW‑5026 H14 Aluminum Alloy – EN 573‑3 Grade, Food‑Safe & High Strength