DIN EN 10085 Grade 1.8522: Comprehensive Mechanical & Physical Properties
Properties
General
| Property | Temperature | Value | Comment |
|---|---|---|---|
Density | 23.0 °C | 7.8 g/cm³ | typical value |
Dimension
| Property | Value |
|---|---|
Thickness | 16 - 250 mm |
Mechanical
| Property | Temperature | Value | Comment |
|---|---|---|---|
Charpy impact energy | 23.0 °C | 30 - 45 J | min. |
Elastic modulus | 23.0 °C | 190 - 210 GPa | typical value |
Elongation | 23.0 °C | 11 - 13 % | min., A5.65 |
Hardness, Brinell | 23.0 °C | 248 [-] | max. |
Poisson's ratio | 23.0 °C | 0.3 [-] | typical value |
Tensile strength | 23.0 °C | 900 - 1350 MPa | |
Yield strength | 23.0 °C | 700 - 950 MPa | min. |
Thermal
| Property | Temperature | Value | Comment |
|---|---|---|---|
Coefficient of thermal expansion | 23.0 °C | 1.3E-5 1/K | typical value |
Specific heat capacity | 23.0 °C | 470 J/(kg·K) | typical value |
Thermal conductivity | 23.0 °C | 39 W/(m·K) | typical value |
Electrical
| Property | Value | Comment |
|---|---|---|
Specific Electrical conductivity | 7.8 % IACS | typical value |
Chemical properties
| Property | Value | Comment | |
|---|---|---|---|
Carbon | 0.29 - 0.36 % | ||
Chromium | 2.8 - 3.3 % | ||
Copper | 0.1 % | max. DIN EN ISO 683-17: 0.1-0.4 | |
Iron | Balance | ||
Manganese | 0.4 - 0.7 % | ||
Molybdenum | 0.7 - 1 % | DIN EN ISO 683-17: 0.7-1.2 | |
Nickel | 0.3 % | max. DIN EN ISO 683-17 | |
Phosphorus | 0.03 % | max. | |
Silicon | 0.4 % | max. DIN EN ISO 683-17: 0.1-0.4 | |
Sulfur | 0.035 % | max. DIN EN ISO 683-17: 0.015 | |
Vanadium | 0.15 - 0.25 % | ||
Metal
- JIS Z3263 BA12PC-O Aluminium Alloy – Standard Properties & Specifications
- JIS Z3263 Grade BA21PC O: 6000 Series Aluminium Sheet – Key Mechanical Properties
- JIS Z3263 Grade BA22PC O: Aluminium Sheet Properties Overview
- JIS Z3263 Grade BA23PC O – 6000 Series Aluminium Specifications
- JIS Z3263 Grade BA24PC O Aluminium Alloy – Properties & Standards
- JIS G3454 Standard – STPG410 Grade Steel: Comprehensive Property Specifications
- DIN EN 10283 Grade 1.4588: High‑Performance Austenitic Stainless Steel, Solution Heat Treated
- AW-2007 O Aluminium Alloy – EN 573-3 Grade Overview
- DIN 1725‑1 Grade 3.3537 O Aluminium Sheet – Key Properties & Standards
- AW-5449 O Aluminium Alloy – EN 573-3 Specification & Properties