AMPCO® 25 Extruded Bars – Superior Hardness & High-Performance Alloy

AMPCOLOY® 944 has been developed by AMPCO METAL to obtain an alloy with ultimate thermal conductivity, good tensile strength and very good hardness, in order to provide an alternative to beryllium copper, where stricter health and safety instructions on the use of noxious elements are required.Prope

AMPCO® 22 is a duplex structure alloy of approx. 50 % of each phase - gamma 2 and beta. It is remarkable because of its hardness, its excellent compression and wear resistance and by its sliding properties. As the elongation of the material is very low, thin sections should be avoided and the materi

2.1293 is a precipitation hardening copper-base alloy. In the heat treated condition, this alloy retains the mechanical properties together with a good ductility in the range of 300-500°C. High electrical conductivity and high mechanical properties are attributes of this versatile alloy.PropertiesGe

The increase in the Al and Fe content results in a material in which the hard gamma 2 phase (about 400 HB) is present. By proper metallurgical control this hard constituent is uniformly distributed giving this alloy its ability to resist wear.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C7.