EN 10277‑5 CM60 Cold‑Drawn Steel: High Strength & Superior Workability
Steel Cm 60 is suitable for high strained parts in vehicle manufacturing, engine and machine engineering that require an enhanced workability while maintaining strength qualities (e.g. gear wheels, pinion, shafts). Lowest application temp. -25 °C.
Properties
General
| Property | Temperature | Value |
|---|---|---|
Density | 20.0 °C | 7.85 g/cm³ |
Mechanical
| Property | Temperature | Value | Comment |
|---|---|---|---|
Elastic modulus | 20.0 °C | 210 GPa | |
100.0 °C | 205 GPa | ||
200.0 °C | 195 GPa | ||
300.0 °C | 185 GPa | ||
400.0 °C | 175 GPa | ||
Elongation | 20.0 °C | 4 - 8 % | |
Poisson's ratio | 23.0 °C | 0.29 [-] | Typical for High Carbon Steel |
Shear modulus | 20.0 °C | 81 GPa | |
Tensile strength | 20.0 °C | 670 - 860 MPa | |
Yield strength | 20.0 °C | 380 - 700 MPa | |
Thermal
| Property | Temperature | Value | Comment |
|---|---|---|---|
Coefficient of thermal expansion | 100.0 °C | 1.11E-5 1/K | |
200.0 °C | 1.21E-5 1/K | ||
300.0 °C | 1.29E-5 1/K | ||
400.0 °C | 1.35E-5 1/K | ||
Max service temperature | 500 °C | Typical for Carbon Steel | |
Max service temperature, long | -25 - 0 °C | ||
Melting point | 1289 - 1478 °C | Typical for High Carbon Steel | |
Specific heat capacity | 23.0 °C | 486 J/(kg·K) | Typical for High Carbon Steel |
Thermal conductivity | 20.0 °C | 51 W/(m·K) | |
100.0 °C | 49.9 W/(m·K) | ||
200.0 °C | 47.8 W/(m·K) | ||
300.0 °C | 44.8 W/(m·K) | ||
Electrical
| Property | Temperature | Value |
|---|---|---|
Electrical resistivity | 20.0 °C | 1.3E-7 Ω·m |
Chemical properties
| Property | Value |
|---|---|
Carbon | 0.57 - 0.65 % |
Manganese | 0.6 - 0.9 % |
Phosphorus | 0.04 % |
Silicon | 0.4 % |
Sulfur | 0.02 - 0.035 % |
Metal
- EN 10277-5 Grade 25CrMo4 Cold-Drawn Steel – High Strength & Ductility
- EN 10277-5 Grade 25CrMoS4 Cold-Drawn Steel – High Strength & Ductility for Automotive & Industrial Applications
- EN 10277-5 Grade 38Cr2 Cold Drawn Steel – High Strength & Low-Temperature Performance
- EN 10277-5 Grade 38CrS2 Cold Drawn Steel – Precision Alloy for Automotive and Machinery
- EN 10277‑5 Grade 41Cr4 Cold‑Drawn Steel – High‑Performance for Automotive & Machine Engineering
- EN 10277-5 Grade 41CrS4 Cold-Drawn Steel – High Strength for Automotive and Industrial Applications
- EN 10277-5 Grade 42CrMo4 – Premium Cold‑Drawn Steel for Heavy‑Duty Applications
- EN 10277‑5 Grade 46Cr2 Cold‑Drawn Steel – High Strength, Low Ductility for Vehicle Components
- EN 10277-5 Grade 46CrS2 Cold Drawn Steel – High Strength & Workability
- EN 10277-5 Grade 50CrMo4 Cold Drawn Steel – High‑Strength, Low‑Temperature Performance