EN 573-3 AW-4014 Aluminium Alloy – Food‑Safe, High‑Performance Sheet & Plate

Material EN AW-Al Si2 is produced (acc. DIN EN 573-4 : 1994-12 (invalid)) for sheet, strip and plates as well as for rolled billets. The alloy is food-safe.

Properties

General

Property	Value	Comment
Density	2.7 g/cm³	Typical for Wrought 4000 Series Aluminium

Mechanical

Property	Value	Comment
Elastic modulus	69.0 - 71.0 GPa	Typical for Wrought 4000 Series Aluminium
Plane-Strain Fracture Toughnes	22.0 - 35.0 MPa·√m	Typical for Wrought 4000 Series Aluminium
Poisson's ratio	0.33 [-]	Typical for Wrought 4000 Series Aluminium
Shear modulus	26.0 GPa	Typical for Wrought 4000 Series Aluminium

Thermal

Property	Value	Comment
Coefficient of thermal expansion	1.2e-05 - 2.2e-05 1/K	Typical for Wrought 4000 Series Aluminium
Melting point	520.0 - 630.0 °C	Typical for Wrought 4000 Series Aluminium
Specific heat capacity	864.0 J/(kg·K)	Typical for Wrought 4000 Series Aluminium
Thermal conductivity	138.0 - 155.0 W/(m·K)	Typical for Wrought 4000 Series Aluminium

Electrical

Property	Value	Comment
Electrical conductivity	23000000.0 - 30000000.0 S/m	Typical for Wrought 4000 Series Aluminium
Electrical resistivity	3.8e-08 - 5e-08 Ω·m	Typical for Wrought 4000 Series Aluminium

Chemical properties

Property	Value	Related Standards
Copper	0.2	EN 573-3, EN 573-4, DIN 1712-3, DIN 1725-1
Iron	0.7	EN 573-3, EN 573-4, DIN 1712-3, DIN 1725-1
Magnesium	0.3 - 0.8 %	EN 573-3, EN 573-4, DIN 1712-3, DIN 1725-1
Manganese	0.35	EN 573-3, EN 573-4, DIN 1712-3, DIN 1725-1
Silicon	1.4 - 2.2 %	EN 573-3, EN 573-4, DIN 1712-3, DIN 1725-1
Zinc	0.2	EN 573-3, EN 573-4, DIN 1712-3, DIN 1725-1

Technological properties

Property
Workability	Moderate Workability

Property

Workability

Moderate Workability

DIN 17210 C10Pb Steel – High Machinability & Low Core Strength for Automotive Parts DIN 1725-1 Grade 3.2305 – Premium E‑AlMgSi Electrical Conductive Alloy

Metal