DIN 17210 C10Pb Steel – High Machinability & Low Core Strength for Automotive Parts

The steel 17 CrNiMo 6 is used for high loaded parts in the vehicle and mechanical engineering with high demands on toughness and core strength (e.g. gear parts, drive pinions). The lowest application amounts to -60 °C.PropertiesGeneralPropertyTemperatureValueDensity20.0 °C7.8 - 7.85 g/cm³MechanicalP

The expansion material NiFe48Cr possesses a relatively low thermal expansion at 450 °C. (Temperature interval RT to 400 °C: coefficient of thermal expansion 9.9 to 10.7 10^-6 K^-1). It is applied for sealings for soft glasses as well as as surge voltage protection. The alloy is of good durability at

The expansion material NiFe46 with the material number 2.4475 is applied in sealings in soft glasses. It possesses a relatively low thermal expansion up to approximately 450 °C. (Temperature interval RT to 400 °C: coefficient of thermal expansion 9.8 to 10.6 10^-6 K^-1). . The alloy is of relative d

The soft-magnetic material NiFe16CuCr with the material number 2.4501 distinguishes itself by the highest initial and maximum permeability as well as by the lowest coercive field strength. It is applied for transformers, e.g. for totalizing current transformers (for fault-current circuit breakers),