EN 573-3 Grade 3.3549 H48 – Premium Aluminium Alloy for Structural Applications
Quantity: One truck load – Specialty products on request.Additional services: Via Cindal (the Aludium R&D department): R&D services, benchmarking, chemical audits, material specification, process optimisation, quality monitoring, sample analysis, prototyping, training
Properties
General
| Property | Value | Condition | Related Standards |
|---|---|---|---|
Density | 2.65 g/cm³ | H48 | EN 573-3, EN 1396, EN 541 |
Mechanical
| Property | Value | Condition | Related Standards | Comment |
|---|---|---|---|---|
Elastic modulus | 70.0 GPa | H48 | EN 573-3, EN 1396, EN 541 | |
Plane-Strain Fracture Toughnes | 22.0 - 35.0 MPa·√m | Typical for Wrought 5000 Series Aluminium | ||
Poisson's ratio | 0.33 [-] | Typical for Wrought 5000 Series Aluminium | ||
Shear modulus | 26.0 - 26.5 GPa | Typical for Wrought 5000 Series Aluminium | ||
Tensile strength | 330.0 MPa | H48 | EN 573-3, EN 1396 | |
355.0 - 400.0 MPa | H48 | EN 573-3, EN 541 |
Thermal
| Property | Temperature | Value | Condition | Related Standards | Comment |
|---|---|---|---|---|---|
Coefficient of thermal expansion | 20 °C | 2.3199999999999998e-05 1/K | H48 | EN 573-3, EN 1396, EN 541 | |
100 °C | 2.3199999999999998e-05 1/K | H48 | EN 573-3, EN 1396, EN 541 | ||
Max service temperature | 150.0 °C | Typical for Wrought 5000 Series Aluminium | |||
Melting point | 577.0 - 638.0 °C | H48 | EN 573-3, EN 1396, EN 541 | ||
Specific heat capacity | 879.0 - 963.0 J/(kg·K) | Typical for Wrought 5000 Series Aluminium | |||
Thermal conductivity | 123 W/(m·K) | H48 | EN 573-3, EN 1396, EN 541 |
Electrical
| Property | Value | Condition | Related Standards |
|---|---|---|---|
Electrical conductivity | 18000000.0 S/m | H48 | EN 573-3, EN 1396, EN 541 |
Electrical resistivity | 5.56e-08 Ω·m | H48 | EN 573-3, EN 1396, EN 541 |
Chemical properties
| Property | Value | Condition | Related Standards |
|---|---|---|---|
Chromium | 0.1 % | H48 | EN 573-3, EN 1396, EN 541 |
Copper | 0.15 % | H48 | EN 573-3, EN 1396, EN 541 |
Iron | 0.35 % | H48 | EN 573-3, EN 1396, EN 541 |
Magnesium | 4.0 - 5.0 % | H48 | EN 573-3, EN 1396, EN 541 |
Manganese | 0.2 - 0.5 % | H48 | EN 573-3, EN 1396, EN 541 |
Silicon | 0.2 % | H48 | EN 573-3, EN 1396, EN 541 |
Titanium | 0.1 % | H48 | EN 573-3, EN 1396, EN 541 |
Zinc | 0.25 % | H48 | EN 573-3, EN 1396, EN 541 |
Technological properties
| Property | ||
|---|---|---|
| Workability | Good workability. | |
Metal
- EN 573-3 Grade 3.3549 F – Premium Aluminum Alloy with Expert R&D Support
- EN 573-3 Grade 3.0505 H48 – Premium Aluminium Alloy Properties
- EN 573-3 Grade 3.3316 H48 Aluminum Alloy – Key Properties & Standards
- EN 573-3 Grade 3.0515 H48 – Key Mechanical Properties & Standards
- EN 573-3 Grade 3.3549 H19 – High-Performance Alloy with Superior Strength
- EN 573-3 Grade 3.0525 H48 – Comprehensive Aluminum Alloy Specifications
- EN 573-3 Grade 3.0526 H48 – High Strength Aluminium Alloy Specifications
- EN 573-3 Grade 3.3525 H48 Aluminium – Properties & Standards
- EN 573-3 Grade 3.3549 H111 Aluminium Alloy – Technical Specifications and R&D Services
- EN 573-3 Grade 3.3549 O – Premium Aluminum Alloy Supplier