AW-3207 F Aluminium Grade – EN 573-3 Certified
Properties
General
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Density | 2.73 g/cm³ | F | EN 573-3, EN 570 | Strip, Sheet, Plate |
Mechanical
| Property | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|
Elastic modulus | 70.0 GPa | F | EN 573-3, EN 570 | Strip, Sheet, Plate | |
Hardness, Brinell | 25.0 [-] | F | EN 573-3, EN 570 | Strip, Sheet, Plate | |
Plane-Strain Fracture Toughnes | 22.0 - 35.0 MPa·√m | Typical for Wrought 3000 Series Aluminium | |||
Poisson's ratio | 0.33 [-] | Typical for Wrought 3000 Series Aluminium | |||
Shear modulus | 25.0 - 26.0 GPa | Typical for Wrought 3000 Series Aluminium |
Thermal
| Property | Value | Comment |
|---|---|---|
Coefficient of thermal expansion | 2.2e-05 - 2.4e-05 1/K | Typical for Wrought 3000 Series Aluminium |
Melting point | 629.0 - 654.0 °C | Typical for Wrought 3000 Series Aluminium |
Specific heat capacity | 893.0 - 920.0 J/(kg·K) | Typical for Wrought 3000 Series Aluminium |
Thermal conductivity | 154.0 - 193.0 W/(m·K) | Typical for Wrought 3000 Series Aluminium |
Electrical
| Property | Value | Comment |
|---|---|---|
Electrical conductivity | 23000000.0 - 29000000.0 S/m | Typical for Wrought 3000 Series Aluminium |
Electrical resistivity | 3.4e-08 - 4.2e-08 Ω·m | Typical for Wrought 3000 Series Aluminium |
Chemical properties
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Copper | 0.1 % | F | EN 573-3, EN 570 | Strip, Sheet, Plate |
Iron | 0.45 % | F | EN 573-3, EN 570 | Strip, Sheet, Plate |
Magnesium | 0.1 % | F | EN 573-3, EN 570 | Strip, Sheet, Plate |
Manganese | 0.4 - 0.8 % | F | EN 573-3, EN 570 | Strip, Sheet, Plate |
Silicon | 0.3 % | F | EN 573-3, EN 570 | Strip, Sheet, Plate |
Zinc | 0.1 % | F | EN 573-3, EN 570 | Strip, Sheet, Plate |
Technological properties
| Property | ||
|---|---|---|
| Anodizing | decorative: sufficient, Protective: very good | |
| Brazing | hard brazing (with flux/ without flux): very good / very good | |
| Corrosion properties | Seawater: good, weathering: very good | |
| Workability | Bending / Spinning (cold): very good / very good, Impact extrusion (cold): good, Deep drawing / upsetting (Condition) very good (O) / very good (H12) | |
Metal
- EN 573-3 Grade 3.0505 F Aluminium Alloy: Properties & Standards
- EN 573-3 Grade 3.1305 F Aluminium Alloy – Key Mechanical Properties
- EN 573-3 Grade 3.1305 O Aluminium: Key Mechanical Properties & Standards
- EN 573-3 Grade 3.1305 O3 – Comprehensive Aluminium Alloy Specifications
- AW-3207 F Aluminium Grade – EN 573-3 Certified
- AW-3207 H19 Aluminium Alloy – EN 573-3 Certified, Food Safe, High Strength
- AW-3207 H27 Aluminium Alloy – Food Safe, EN 573-3 Certified
- AW-3207 H28 Aluminium Alloy – EN 573-3 Certified, Food Safe & Durable
- AW-3207 H47: Food‑Safe AlMn Alloy Certified EN 573‑3
- AW-3207 H48 Aluminium Alloy – EN 573-3 Certified, Food Safe & High Strength