AW-1098 F Aluminium – EN 573-3 Grade & Core Mechanical Properties
Properties
General
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Density | 2.7 g/cm³ | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate |
Mechanical
| Property | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|
Elastic modulus | 70.0 GPa | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate | |
Hardness, Brinell | 18.0 [-] | F | EN 573-3, EN 570 | Strip, Sheet, Plate | |
Plane-Strain Fracture Toughnes | 22.0 - 35.0 MPa·√m | Typical for Wrought 1000 Series Aluminium | |||
Poisson's ratio | 0.33 [-] | Typical for Wrought 1000 Series Aluminium | |||
Shear modulus | 25.9 GPa | Typical for Wrought 1000 Series Aluminium | |||
Tensile strength | 75.0 - 85.0 MPa | F | EN 573-3, EN 1715-3 | Strip, Sheet, Plate |
Thermal
| Property | Temperature | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|---|
Coefficient of thermal expansion | -50 °C | 2.18e-05 1/K | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate |
20 °C | 2.18e-05 1/K | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate | |
20 °C | 2.35e-05 1/K | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate | |
20 °C | 2.45e-05 1/K | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate | |
20 °C | 2.55e-05 1/K | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate | |
100 °C | 2.35e-05 1/K | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate | |
200 °C | 2.45e-05 1/K | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate | |
300 °C | 2.55e-05 1/K | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate | |
Melting point | 660.0 °C | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate | |
Specific heat capacity | 900.0 J/(kg·K) | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate | |
Thermal conductivity | 232 W/(m·K) | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate |
Electrical
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Electrical conductivity | 37500000.0 - 37700000.0 S/m | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate |
Electrical resistivity | 2.65e-08 - 2.67e-08 Ω·m | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate |
Chemical properties
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Aluminium | 99.98 % | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate |
Copper | 0.003 % | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate |
Iron | 0.006 % | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate |
Silicon | 0.01 % | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate |
Titanium | 0.003 % | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate |
Zinc | 0.015 % | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate |
Technological properties
| Property | ||
|---|---|---|
| Brazing | hard brazing (with flux/ without flux): very good / very good, friction soldering: very good, soft brazing with flux: very good, general: very good | |
| Corrosion properties | Seawater: acceptable, weathering: good | |
| Workability | Bending / Spinning (cold): very good | |
Metal
- EN 573-3 Grade 3.0505 F Aluminium Alloy: Properties & Standards
- EN 573-3 Grade 3.1305 F Aluminium Alloy – Key Mechanical Properties
- EN 573-3 Grade 3.1305 O Aluminium: Key Mechanical Properties & Standards
- EN 573-3 Grade 3.1305 O3 – Comprehensive Aluminium Alloy Specifications
- EN 573-3 Grade 3.3316 F – Key Properties & Standards for 5000 Series Aluminium
- EN 573-3 Grade 3.3549 F – Premium Aluminum Alloy with Expert R&D Support
- EN 573-3 AW‑1090 F Aluminium: Technical Specifications & Standards
- EN 573-3 Grade AW-1098 O – Food Safe Aluminum with High Strength and Corrosion Resistance
- AW-1098 H14 Aluminum – EN 573-3 Certified Food‑Safe Grade
- EN 573-3 Grade AW-1098 H18 – Food‑Safe Aluminum with Superior Mechanical Properties