EN 10095 Grade X6CrNiSiNCe19-10 – Solution Annealed Stainless Steel for High-Temperature Applications
Steel X6CrNiSiNCe19-10 shows a highest application temperature of up to 1050 °C in air.
Properties
General
| Property | Temperature | Value |
|---|---|---|
Density | 20.0 °C | 7.8 g/cm³ |
Mechanical
| Property | Temperature | Value | Comment |
|---|---|---|---|
Elastic modulus | 23.0 °C | 195 GPa | Typical for Austenitic Stainless Steel |
Elongation | 20.0 °C | 40 % | |
Elongation A80 | 20.0 °C | 30 % | |
Hardness, Brinell | 20.0 °C | 210 [-] | |
Poisson's ratio | 23.0 °C | 0.3 [-] | Typical for Austenitic Stainless Steel |
Shear modulus | 23.0 °C | 77 GPa | Typical for Austenitic Stainless Steel |
Tensile strength | 20.0 °C | 600 - 800 MPa | |
Yield strength Rp0.2 | 20.0 °C | 290 MPa | |
Yield strength Rp1.0 | 20.0 °C | 330 MPa |
Thermal
| Property | Temperature | Value | Comment |
|---|---|---|---|
Coefficient of thermal expansion | 200.0 °C | 1.65E-5 1/K | |
400.0 °C | 1.8E-5 1/K | ||
600.0 °C | 1.85E-5 1/K | ||
800.0 °C | 1.9E-5 1/K | ||
1000.0 °C | 2E-5 1/K | ||
Max service temperature, long | 0 - 1050 °C | ||
Melting point | 1230 - 1480 °C | Typical for Austenitic Stainless Steel | |
Specific heat capacity | 20.0 °C | 500 J/(kg·K) | |
Thermal conductivity | 20.0 °C | 15 W/(m·K) | |
500.0 °C | 21 W/(m·K) | ||
Electrical
| Property | Temperature | Value |
|---|---|---|
Electrical resistivity | 20.0 °C | 8.5E-7 Ω·m |
Chemical properties
| Property | Value |
|---|---|
Carbon | 0.04 - 0.08 % |
Cerium | 0.03 - 0.08 % |
Chromium | 18 - 20 % |
Manganese | 1 % |
Nickel | 9 - 11 % |
Nitrogen | 0.12 - 0.2 % |
Phosphorus | 0.05 % |
Silicon | 1 - 2 % |
Sulfur | 0.015 % |
Metal
- EN 10095 NiCr20Ti Alloy – Solution Annealed (With AT)
- EN 10095 NiCr23Fe Alloy – Solution Annealed for Superior High‑Temperature Oxidation Resistance
- EN 10095 X10NiCrSi35-19: Solution-Annealed Steel for High-Temperature Applications up to 1100°C
- EN 10095 X6NiCrSiNCe35-25 – Solution Annealed, High‑Temperature Stainless Steel
- EN 10095 X12NiCrSi35-16 Solution-Annealed Alloy – High‑Temperature Stability & Low Embrittlement
- EN 10095 X25CrMnNiN25-9-7 Stainless Steel – Solution Annealed with Additional Treatment
- EN 10095 X10NiCrSiNb35-22 Duplex Stainless Steel – Solution Annealed & Aged for High‑Temperature Performance
- EN 10095 X9CrNiSiNCe21-11-2: High-Temperature Solution-Annealed Austenitic Steel (+AT)
- EN 10095 Grade X8CrNiTi18-10 – Solution Annealed Steel for High-Load Applications
- EN 10095 Grade X10NiCrAlTi32‑21 – Solution Annealed Steel for High‑Temperature Pressure Applications