Manufacturing Technology Manufacturing Equipment

Industrial manufacturing

Industrial Internet of Things | Industrial materials | Equipment Maintenance and Repair | Industrial programming |

MfgRobots >> Industrial manufacturing > >> Industrial materials >> Metal

EN 573-3 Grade 3.3315 H34 – Comprehensive Material Specifications

Properties

General

Property	Value	Condition	Related Standards
Density	2.69 g/cm³	H34	EN 573-3, EN 485

Mechanical

Property	Value	Condition	Related Standards	Comment
Bending angle 180°	1.5 °/t	H34	EN 573-3, EN 485
	2.0 °/t	H34	EN 573-3, EN 485
Bending angle 90°	0.5 °/t	H34	EN 573-3, EN 485
	1.0 °/t	H34	EN 573-3, EN 485
	2.0 °/t	H34	EN 573-3, EN 485
	2.5 °/t	H34	EN 573-3, EN 485
Elastic modulus	69.5 GPa	H34	EN 573-3, EN 485
Hardness, Brinell	47.0 [-]	H34	EN 573-3, EN 485
Plane-Strain Fracture Toughnes	22.0 - 35.0 MPa·√m			Typical for Wrought 5000 Series Aluminium
Poisson's ratio	0.33 [-]			Typical for Wrought 5000 Series Aluminium
Shear modulus	26.1 GPa	H34	EN 573-3, EN 485
Tensile strength	145.0 - 185.0 MPa	H34	EN 573-3, EN 485

Thermal

Property	Temperature	Value	Condition	Related Standards	Comment
Coefficient of thermal expansion	-50 °C	2.18e-05 1/K	H34	EN 573-3, EN 485
	20 °C	2.18e-05 1/K	H34	EN 573-3, EN 485
	20 °C	2.36e-05 1/K	H34	EN 573-3, EN 485
	20 °C	2.45e-05 1/K	H34	EN 573-3, EN 485
	20 °C	2.55e-05 1/K	H34	EN 573-3, EN 485
	100 °C	2.36e-05 1/K	H34	EN 573-3, EN 485
	200 °C	2.45e-05 1/K	H34	EN 573-3, EN 485
	300 °C	2.55e-05 1/K	H34	EN 573-3, EN 485
Max service temperature		150.0 °C			Typical for Wrought 5000 Series Aluminium
Melting point		630.0 - 650.0 °C	H34	EN 573-3, EN 485
Specific heat capacity		879.0 - 963.0 J/(kg·K)			Typical for Wrought 5000 Series Aluminium
Thermal conductivity		160.0 - 220.0 W/(m·K)	H34	EN 573-3, EN 485

Electrical

Property	Value	Condition	Related Standards
Electrical conductivity	23000000.0 - 31000000.0 S/m	H34	EN 573-3, EN 485
Electrical resistivity	3.23e-08 - 4.35e-08 Ω·m	H34	EN 573-3, EN 485

Chemical properties

Property	Value	Condition	Related Standards
Chromium	0.1 %	H34	EN 573-3, EN 485
Copper	0.2 %	H34	EN 573-3, EN 485
Iron	0.70 %	H34	EN 573-3, EN 485
Magnesium	1.1 - 1.8 %	H34	EN 573-3, EN 485
Manganese	0.3 %	H34	EN 573-3, EN 485
Silicon	0.4 %	H34	EN 573-3, EN 485
Zinc	0.25 %	H34	EN 573-3, EN 485

Technological properties

Property

Workability

Good workability.

EN 10216-5 Grade X8CrNiTi18-10 – Solution-Annealed Steel for Superior Creep Resistance in Pressure Vessels & Nuclear Plants EN 573-3 Grade 3.3316 H22 Steel – Comprehensive Property & Standard Overview

Metal

Composite material

Polymer Materials