Alloy 3 (C17510) TH04 Rods & Bars – High Conductivity, Balanced Strength

Bar, Rod and Wire Drawing Drawing is a metal working process that forms steel work piece by reducing its cross section. This is accomplished by forcing the work piece through a die of smaller cross sectional area than the work piece. In the process of drawing the work piece is pulled through the die

Alloy 3 from Materion Performance Alloys provides high electrical and thermal conductivity coupled with moderate strength.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C8.83 g/cm³MechanicalPropertyTemperatureValueElastic modulus23.0 °C138 GPaElongation23.0 °C10 - 25 %Hardness, Rockwell B23.0

Materion’s Alloy 10X is a copper-cobalt-beryllium-zirconium alloy developed for improved high temperature strength and ductility. Most high strength copper alloys lose significant strength and ductility at elevated temperature. Alloy 10X retains good strength and ductility at temperatures up to 800

A controlled expansion alloy, consisting of 51% Nickel, balance Iron.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C8.3 g/cm³DimensionPropertyValueWidth1.02 - 7.93 mmDimensionsAvailable widths: 1.0mm, 1.6mm, 2.4mm, 2.4mm, 2.8mm, 3.2mm, 4.0mm, 4.8mm, 6.4mm, 7.9MechanicalPropertyTemperatureVal