EN 573-3 Grade 3.0255 H26 – Premium Aluminum Alloy for Industrial Applications
Quantity: One truck load – Specialty products on request.Additional services: Via Cindal (the Aludium R&D department): R&D services, benchmarking, chemical audits, material specification, process optimisation, quality monitoring, sample analysis, prototyping, training
Properties
General
| Property | Value | Condition | Related Standards |
|---|---|---|---|
Density | 2.7 g/cm³ | H26 | EN 573-3, EN 485 |
Mechanical
| Property | Value | Condition | Related Standards | Comment |
|---|---|---|---|---|
Bending angle 90° | 0.5 °/t | H26 | EN 573-3, EN 485 | |
1.0 °/t | H26 | EN 573-3, EN 485 | ||
1.5 °/t | H26 | EN 573-3, EN 485 | ||
Elastic modulus | 69.0 GPa | H26 | EN 573-3, EN 485 | |
Hardness, Brinell | 38.0 [-] | H26 | EN 573-3, EN 485 | |
Plane-Strain Fracture Toughnes | 22.0 - 35.0 MPa·√m | Typical for Wrought 1000 Series Aluminium | ||
Poisson's ratio | 0.33 [-] | Typical for Wrought 1000 Series Aluminium | ||
Shear modulus | 25.9 GPa | H26 | EN 573-3, EN 485 | |
Tensile strength | 120.0 - 160.0 MPa | H26 | EN 573-3, EN 485 |
Thermal
| Property | Temperature | Value | Condition | Related Standards |
|---|---|---|---|---|
Coefficient of thermal expansion | -50 °C | 2.17e-05 1/K | H26 | EN 573-3, EN 485 |
20 °C | 2.17e-05 1/K | H26 | EN 573-3, EN 485 | |
20 °C | 2.35e-05 1/K | H26 | EN 573-3, EN 485 | |
20 °C | 2.4399999999999997e-05 1/K | H26 | EN 573-3, EN 485 | |
20 °C | 2.5399999999999997e-05 1/K | H26 | EN 573-3, EN 485 | |
100 °C | 2.35e-05 1/K | H26 | EN 573-3, EN 485 | |
200 °C | 2.4399999999999997e-05 1/K | H26 | EN 573-3, EN 485 | |
300 °C | 2.5399999999999997e-05 1/K | H26 | EN 573-3, EN 485 | |
Melting point | 646.0 - 657.0 °C | H26 | EN 573-3, EN 485 | |
Specific heat capacity | 900.0 J/(kg·K) | H26 | EN 573-3, EN 485 | |
Thermal conductivity | 210.0 - 220.0 W/(m·K) | H26 | EN 573-3, EN 485 |
Electrical
| Property | Value | Condition | Related Standards |
|---|---|---|---|
Electrical conductivity | 34000000.0 - 36000000.0 S/m | H26 | EN 573-3, EN 485 |
Electrical resistivity | 2.78e-08 - 2.94e-08 Ω·m | H26 | EN 573-3, EN 485 |
Chemical properties
| Property | Value | Condition | Related Standards |
|---|---|---|---|
Aluminium | 99.5 % | H26 | EN 573-3, EN 485 |
Copper | 0.05 % | H26 | EN 573-3, EN 485 |
Iron | 0.40 % | H26 | EN 573-3, EN 485 |
Magnesium | 0.05 % | H26 | EN 573-3, EN 485 |
Manganese | 0.05 % | H26 | EN 573-3, EN 485 |
Silicon | 0.25 % | H26 | EN 573-3, EN 485 |
Titanium | 0.05 % | H26 | EN 573-3, EN 485 |
Zinc | 0.07 % | H26 | EN 573-3, EN 485 |
Technological properties
| Property | ||
|---|---|---|
| Anodizing | decorative: gut (EQ: sehr gut), Protective: very good | |
| Brazing | hard brazing (with flux/ without flux): very good / very good, friction soldering: very good, soft brazing with flux: very good | |
| Corrosion properties | Seawater: acceptable, weathering: good | |
| Workability | Bending / Spinning (cold): very good / very good, Impact extrusion (cold): very good, Deep drawing / upsetting (Condition) very good (H14) / very good (H12) | |
Metal
- EN 573-3 Grade 3.0915 H26 Aluminium Alloy – Key Properties & Standards
- EN 573-3 Grade 3.0515 O3 – Key Mechanical & Thermal Properties
- AW-4043A O3 – EN 573-3 Certified 4000 Series Aluminium
- EN 573-3 Grade AW-4047A O3 Aluminium Alloy Specifications
- EN 573-3 AW-5556A F – High-Performance 5000 Series Aluminium Alloy
- EN 573-3 Certified AW-5556A O3 Aluminum Grade
- AW-8008 H26 Aluminium Alloy – EN 573-3 Certified Food‑Safe, High‑Strength Grade
- EN 573-3 AW‑5087 F Aluminum Grade: Key Properties & Standards
- AW-5087 O3 Aluminium Alloy – EN 573-3 Certified Properties
- AW-5449 H26 – EN 573-3 Grade 5000 Series Aluminium Alloy