AW-5754 H224 (EN 573-3) Premium Aluminum Alloy – Ideal for Strips, Sheets, and Industrial Applications

Quantity: One truck load – Specialty products on request.Additional services: Via Cindal (the Aludium R&D department): R&D services, benchmarking, chemical audits, material specification, process optimisation, quality monitoring, sample analysis, prototyping, training

Properties

General

Property	Value	Condition	Related Standards	Shape
Density	2.66 g/cm³	H224	EN 573-3, EN 1386	Strip, Sheet, Plate, Wire, Forging, Tube, Bar

Mechanical

Property	Value	Condition	Related Standards	Shape	Comment
Bending angle 90°	2.0 °/t	H224	EN 573-3, EN 1386	Strip, Sheet, Plate, Wire, Forging, Tube, Bar
	2.5 °/t	H224	EN 573-3, EN 1386	Strip, Sheet, Plate, Wire, Forging, Tube, Bar
Elastic modulus	70.5 GPa	H224	EN 573-3, EN 1386	Strip, Sheet, Plate, Wire, Forging, Tube, Bar
Plane-Strain Fracture Toughnes	22.0 - 35.0 MPa·√m				Typical for Wrought 5000 Series Aluminium
Poisson's ratio	0.33 [-]				Typical for Wrought 5000 Series Aluminium
Shear modulus	26.5 GPa	H224	EN 573-3, EN 1386	Strip, Sheet, Plate, Wire, Forging, Tube, Bar
Tensile strength	220.0 - 275.0 MPa	H224	EN 573-3, EN 1386	Strip, Sheet, Plate, Wire, Forging, Tube, Bar

Thermal

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Coefficient of thermal expansion	20 °C	2.3899999999999998e-05 1/K	H224	EN 573-3, EN 1386	Strip, Sheet, Plate, Wire, Forging, Tube, Bar
	100 °C	2.3899999999999998e-05 1/K	H224	EN 573-3, EN 1386	Strip, Sheet, Plate, Wire, Forging, Tube, Bar
Max service temperature		150.0 °C				Typical for Wrought 5000 Series Aluminium
Melting point		610.0 - 640.0 °C	H224	EN 573-3, EN 1386	Strip, Sheet, Plate, Wire, Forging, Tube, Bar
Specific heat capacity		879.0 - 963.0 J/(kg·K)				Typical for Wrought 5000 Series Aluminium
Thermal conductivity		140.0 - 160.0 W/(m·K)	H224	EN 573-3, EN 1386	Strip, Sheet, Plate, Wire, Forging, Tube, Bar

Electrical

Property	Value	Condition	Related Standards	Shape
Electrical conductivity	20000000.0 - 23000000.0 S/m	H224	EN 573-3, EN 1386	Strip, Sheet, Plate, Wire, Forging, Tube, Bar
Electrical resistivity	4.35e-08 - 5e-08 Ω·m	H224	EN 573-3, EN 1386	Strip, Sheet, Plate, Wire, Forging, Tube, Bar

Chemical properties

Property	Value	Condition	Related Standards	Shape
Chromium	0.3 %	H224	EN 573-3, EN 1386	Strip, Sheet, Plate, Wire, Forging, Tube, Bar
Copper	0.1 %	H224	EN 573-3, EN 1386	Strip, Sheet, Plate, Wire, Forging, Tube, Bar
Iron	0.40 %	H224	EN 573-3, EN 1386	Strip, Sheet, Plate, Wire, Forging, Tube, Bar
Magnesium	2.6 - 3.6 %	H224	EN 573-3, EN 1386	Strip, Sheet, Plate, Wire, Forging, Tube, Bar
Manganese	0.5 %	H224	EN 573-3, EN 1386	Strip, Sheet, Plate, Wire, Forging, Tube, Bar
Silicon	0.4 %	H224	EN 573-3, EN 1386	Strip, Sheet, Plate, Wire, Forging, Tube, Bar
Titanium	0.15 %	H224	EN 573-3, EN 1386	Strip, Sheet, Plate, Wire, Forging, Tube, Bar
Zinc	0.2 %	H224	EN 573-3, EN 1386	Strip, Sheet, Plate, Wire, Forging, Tube, Bar

Technological properties

Property
Anodizing	decorative: gut (EQ: sehr gut), Protective: very good
Brazing	hard brazing (with flux/ without flux): poor / sufficient, friction soldering: acceptable, soft brazing with flux: poor
Corrosion properties	Seawater: very good to good, weathering: very good
Workability	Bending / Spinning (cold): good / acceptable, Impact extrusion (cold): sufficient, Deep drawing / upsetting (Condition) good (O) / good (H12)

AA 5254 H38 Aluminium Alloy – Key Mechanical Properties & Standards AA 5154 H38 Aluminium Alloy: Standards & Mechanical Properties

Metal