AW-5754 H46: Premium EN 573-3 Certified Aluminium Alloy
Naturally hard AlMg alloy. The alloy is food safe.
Quantity: One truck load – Specialty products on request.Additional services: Via Cindal (the Aludium R&D department): R&D services, benchmarking, chemical audits, material specification, process optimisation, quality monitoring, sample analysis, prototyping, trainingProperties
General
| Property | Temperature | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|---|
Density | 2.66 g/cm³ | H46 | EN 573-3, EN 1396 | Strip, Sheet, Plate, Wire, Forging, Tube, Bar | |
20.0 °C | 2.66 g/cm³ | H46 | EN 573-3 | Sheet, Strip | |
20.0 °C | 2.66 - 2.68 g/cm³ | H46 | EN 573-3 | Sheet, Strip | |
20.0 °C | 2.68 g/cm³ | H46 | EN 573-3 | Sheet, Strip |
Mechanical
| Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|---|
Elastic modulus | -270.0 °C | 70.0 GPa | H46 | EN 573-3 | Sheet, Strip | |
70.5 GPa | H46 | EN 573-3, EN 1396 | Strip, Sheet, Plate, Wire, Forging, Tube, Bar | |||
20.0 °C | 70.0 GPa | H46 | EN 573-3 | Sheet, Strip | ||
20.0 °C | 70.0 - 70.5 GPa | H46 | EN 573-3 | Sheet, Strip | ||
20.0 °C | 70.5 GPa | H46 | EN 573-3 | Sheet, Strip | ||
50.0 °C | 69.0 GPa | H46 | EN 573-3 | Sheet, Strip | ||
100.0 °C | 68.0 GPa | H46 | EN 573-3 | Sheet, Strip | ||
150.0 °C | 66.0 GPa | H46 | EN 573-3 | Sheet, Strip | ||
200.0 °C | 63.0 GPa | H46 | EN 573-3 | Sheet, Strip | ||
250.0 °C | 57.0 GPa | H46 | EN 573-3 | Sheet, Strip | ||
300.0 °C | 50.0 GPa | H46 | EN 573-3 | Sheet, Strip | ||
Plane-Strain Fracture Toughnes | 22.0 - 35.0 MPa·√m | Typical for Wrought 5000 Series Aluminium | ||||
Poisson's ratio | 20.0 °C | 0.33 [-] | H46 | EN 573-3 | Sheet, Strip | |
Shear modulus | 26.5 GPa | H46 | EN 573-3, EN 1396 | Strip, Sheet, Plate, Wire, Forging, Tube, Bar | ||
20.0 °C | 26.5 - 27.0 GPa | H46 | EN 573-3 | Sheet, Strip | ||
20.0 °C | 26.5 GPa | H46 | EN 573-3 | Sheet, Strip | ||
Tensile strength | 20.0 °C | 260.0 - 310.0 MPa | H46 | EN 573-3 | Sheet, Strip | Transverse |
20.0 °C | 260.0 - 310.0 MPa | H46 | EN 573-3, EN 1396 | Strip, Sheet, Plate, Wire, Forging, Tube, Bar |
Thermal
| Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|---|
Coefficient of thermal expansion | 20 °C | 2.3899999999999998e-05 1/K | H46 | EN 573-3, EN 1396 | Strip, Sheet, Plate, Wire, Forging, Tube, Bar | |
100 °C | 2.3899999999999998e-05 1/K | H46 | EN 573-3, EN 1396 | Strip, Sheet, Plate, Wire, Forging, Tube, Bar | ||
100.0 °C | 2.39e-05 1/K | H46 | EN 573-3 | Sheet, Strip | ||
Max service temperature | 150.0 °C | Typical for Wrought 5000 Series Aluminium | ||||
Melting point | 610.0 - 640.0 °C | H46 | EN 573-3, EN 1396 | Strip, Sheet, Plate, Wire, Forging, Tube, Bar | ||
Specific heat capacity | 20.0 °C | 897.0 - 963.0 J/(kg·K) | H46 | EN 573-3 | Sheet, Strip | |
20.0 °C | 897.0 J/(kg·K) | H46 | EN 573-3 | Sheet, Strip | ||
20.0 °C | 963.0 J/(kg·K) | H46 | EN 573-3 | Sheet, Strip | ||
Thermal conductivity | 20.0 °C | 132.0 - 160.0 W/(m·K) | H46 | EN 573-3 | Sheet, Strip | |
20.0 °C | 132.0 - 140.0 W/(m·K) | H46 | EN 573-3 | Sheet, Strip | ||
20.0 °C | 132.0 W/(m·K) | H46 | EN 573-3 | Sheet, Strip | ||
20.0 °C | 140.0 - 160.0 W/(m·K) | H46 | EN 573-3, EN 1396 | Strip, Sheet, Plate, Wire, Forging, Tube, Bar |
Electrical
| Property | Temperature | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|---|
Electrical conductivity | 20.0 °C | 20000000.0 - 23000000.0 S/m | H46 | EN 573-3, EN 1396 | Strip, Sheet, Plate, Wire, Forging, Tube, Bar |
Electrical resistivity | 4.35e-08 - 5e-08 Ω·m | H46 | EN 573-3, EN 1396 | Strip, Sheet, Plate, Wire, Forging, Tube, Bar | |
20.0 °C | 4.3e-08 - 5.3e-08 Ω·m | H46 | EN 573-3 | Sheet, Strip | |
20.0 °C | 4.3e-08 - 5e-08 Ω·m | H46 | EN 573-3 | Sheet, Strip | |
20.0 °C | 5e-08 - 5.3e-08 Ω·m | H46 | EN 573-3 | Sheet, Strip | |
20.0 °C | 5.3e-08 Ω·m | H46 | EN 573-3 | Sheet, Strip |
Chemical properties
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Chromium | 0.3 % | H46 | EN 573-3, EN 1396 | Sheet, Strip, Plate, Wire, Forging, Tube, Bar |
Copper | 0.1 % | H46 | EN 573-3, EN 1396 | Sheet, Strip, Plate, Wire, Forging, Tube, Bar |
Iron | 0.4 % | H46 | EN 573-3 | Sheet, Strip |
0.40 % | H46 | EN 573-3, EN 1396 | Strip, Sheet, Plate, Wire, Forging, Tube, Bar | |
Magnesium | 2.6 - 3.6 % | H46 | EN 573-3, EN 1396 | Sheet, Strip, Plate, Wire, Forging, Tube, Bar |
Manganese | 0.5 % | H46 | EN 573-3, EN 1396 | Sheet, Strip, Plate, Wire, Forging, Tube, Bar |
Silicon | 0.4 % | H46 | EN 573-3, EN 1396 | Sheet, Strip, Plate, Wire, Forging, Tube, Bar |
Titanium | 0.15 % | H46 | EN 573-3, EN 1396 | Sheet, Strip, Plate, Wire, Forging, Tube, Bar |
Zinc | 0.2 % | H46 | EN 573-3, EN 1396 | Sheet, Strip, Plate, Wire, Forging, Tube, Bar |
Technological properties
| Property | ||
|---|---|---|
| Anodizing | decorative: gut (EQ: sehr gut), Protective: very good | |
| Brazing | hard brazing (with flux/ without flux): poor / sufficient, friction soldering: acceptable, soft brazing with flux: poor | |
| Corrosion properties | Seawater: very good to good, weathering: very good | |
| Workability | Bending / Spinning (cold): good / acceptable, Impact extrusion (cold): sufficient, Deep drawing / upsetting (Condition) good (O) / good (H12) | |
Metal
- AW-5754 O3 Aluminium – EN 573-3 Certified Grade
- AW-3105A H46: Food‑Safe Al‑Mn Alloy (EN 573‑3)
- EN 573-3 Grade 3.3535 H46 – Premium Aluminum Alloy for Industrial R&D and Prototyping
- AW-5754 H114 Aluminium Alloy – EN 573-3 Certified Grade
- EN 573-3 AW-5754 H244: Premium Aluminum Alloy for Industrial Applications
- AW-5754 H224 (EN 573-3) Premium Aluminum Alloy – Ideal for Strips, Sheets, and Industrial Applications
- AW-5010 H46 Aluminum Alloy – EN 573-3 Grade, 5000 Series
- AW-3103 H46: Certified EN 573-3 AlMn Alloy for Food-Safe Applications
- AW‑5754 H42 Aluminum Alloy – Food‑Safe, High‑Strength, EN 573‑3 Certified
- AW-5754 H41 Aluminum Alloy – EN 573‑3 Certified, Food‑Safe, High‑Strength